# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements.  See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership.  The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License.  You may obtain a copy of the License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied.  See the License for the
# specific language governing permissions and limitations
# under the License.
# Chinese translations for Apache Superset.
msgid ""
msgstr ""
"Project-Id-Version: Apache Superset 0.22.1\n"
"Report-Msgid-Bugs-To: zhouyao94@qq.com\n"
"POT-Creation-Date: 2018-06-07 00:22-0700\n"
"PO-Revision-Date: 2019-01-04 22:19+0800\n"
"Last-Translator: \n"
"Language-Team: zh <benedictjin2016@gmail.com>\n"
"Language: zh\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"Generated-By: Babel 2.6.0\n"
"X-Generator: Poedit 2.2\n"

#: superset/assets/src/explore/controls.jsx:818 superset/db_engine_specs.py:343
#: superset/db_engine_specs.py:393 superset/db_engine_specs.py:422
#: superset/db_engine_specs.py:447 superset/db_engine_specs.py:499
#: superset/db_engine_specs.py:561 superset/db_engine_specs.py:625
#: superset/db_engine_specs.py:1190 superset/db_engine_specs.py:1232
#: superset/db_engine_specs.py:1287 superset/db_engine_specs.py:1332
#: superset/db_engine_specs.py:1365 superset/db_engine_specs.py:1395
#: superset/db_engine_specs.py:1413
msgid "Time Column"
msgstr "时间字段"

#: superset/db_engine_specs.py:344 superset/db_engine_specs.py:394
#: superset/db_engine_specs.py:448 superset/db_engine_specs.py:562
#: superset/db_engine_specs.py:626 superset/db_engine_specs.py:1191
#: superset/db_engine_specs.py:1233 superset/db_engine_specs.py:1333
#: superset/db_engine_specs.py:1396 superset/db_engine_specs.py:1414
msgid "second"
msgstr "秒"

#: superset/db_engine_specs.py:346 superset/db_engine_specs.py:395
#: superset/db_engine_specs.py:423 superset/db_engine_specs.py:452
#: superset/db_engine_specs.py:566 superset/db_engine_specs.py:629
#: superset/db_engine_specs.py:1194 superset/db_engine_specs.py:1236
#: superset/db_engine_specs.py:1288 superset/db_engine_specs.py:1334
#: superset/db_engine_specs.py:1366 superset/db_engine_specs.py:1397
#: superset/db_engine_specs.py:1417
msgid "minute"
msgstr "分"

#: superset/db_engine_specs.py:348 superset/db_engine_specs.py:396
#: superset/db_engine_specs.py:424 superset/db_engine_specs.py:457
#: superset/db_engine_specs.py:500 superset/db_engine_specs.py:569
#: superset/db_engine_specs.py:632 superset/db_engine_specs.py:1203
#: superset/db_engine_specs.py:1239 superset/db_engine_specs.py:1297
#: superset/db_engine_specs.py:1335 superset/db_engine_specs.py:1367
#: superset/db_engine_specs.py:1398 superset/db_engine_specs.py:1420
msgid "hour"
msgstr "小时"

#: superset/db_engine_specs.py:350 superset/db_engine_specs.py:397
#: superset/db_engine_specs.py:425 superset/db_engine_specs.py:463
#: superset/db_engine_specs.py:503 superset/db_engine_specs.py:572
#: superset/db_engine_specs.py:635 superset/db_engine_specs.py:1206
#: superset/db_engine_specs.py:1242 superset/db_engine_specs.py:1300
#: superset/db_engine_specs.py:1336 superset/db_engine_specs.py:1368
#: superset/db_engine_specs.py:1399 superset/db_engine_specs.py:1423
msgid "day"
msgstr "天"

#: superset/db_engine_specs.py:352 superset/db_engine_specs.py:398
#: superset/db_engine_specs.py:426 superset/db_engine_specs.py:470
#: superset/db_engine_specs.py:504 superset/db_engine_specs.py:573
#: superset/db_engine_specs.py:638 superset/db_engine_specs.py:1209
#: superset/db_engine_specs.py:1245 superset/db_engine_specs.py:1337
#: superset/db_engine_specs.py:1369 superset/db_engine_specs.py:1400
#: superset/db_engine_specs.py:1426
msgid "week"
msgstr "周"

#: superset/db_engine_specs.py:354 superset/db_engine_specs.py:399
#: superset/db_engine_specs.py:427 superset/db_engine_specs.py:473
#: superset/db_engine_specs.py:507 superset/db_engine_specs.py:576
#: superset/db_engine_specs.py:641 superset/db_engine_specs.py:1212
#: superset/db_engine_specs.py:1248 superset/db_engine_specs.py:1303
#: superset/db_engine_specs.py:1338 superset/db_engine_specs.py:1370
#: superset/db_engine_specs.py:1401 superset/db_engine_specs.py:1430
msgid "month"
msgstr "月"

#: superset/db_engine_specs.py:356 superset/db_engine_specs.py:400
#: superset/db_engine_specs.py:428 superset/db_engine_specs.py:476
#: superset/db_engine_specs.py:579 superset/db_engine_specs.py:644
#: superset/db_engine_specs.py:1215 superset/db_engine_specs.py:1251
#: superset/db_engine_specs.py:1306 superset/db_engine_specs.py:1339
#: superset/db_engine_specs.py:1371 superset/db_engine_specs.py:1402
#: superset/db_engine_specs.py:1433
msgid "quarter"
msgstr "季度"

#: superset/db_engine_specs.py:358 superset/db_engine_specs.py:401
#: superset/db_engine_specs.py:429 superset/db_engine_specs.py:481
#: superset/db_engine_specs.py:510 superset/db_engine_specs.py:582
#: superset/db_engine_specs.py:655 superset/db_engine_specs.py:1218
#: superset/db_engine_specs.py:1309 superset/db_engine_specs.py:1341
#: superset/db_engine_specs.py:1372 superset/db_engine_specs.py:1403
#: superset/db_engine_specs.py:1437
msgid "year"
msgstr "年"

#: superset/db_engine_specs.py:513 superset/db_engine_specs.py:647
#: superset/db_engine_specs.py:1254
msgid "week_ending_saturday"
msgstr "周日为一周开始"

#: superset/db_engine_specs.py:516 superset/db_engine_specs.py:651
#: superset/db_engine_specs.py:1258
msgid "week_start_sunday"
msgstr "周日为一周结束"

#: superset/db_engine_specs.py:585
msgid "week_start_monday"
msgstr "周一为一周开始"

#: superset/db_engine_specs.py:1197 superset/db_engine_specs.py:1291
msgid "5 minute"
msgstr "5 分钟"

#: superset/db_engine_specs.py:1200
msgid "half hour"
msgstr "半小时"

#: superset/db_engine_specs.py:1294
msgid "10 minute"
msgstr "10 分钟"

#: superset/connectors/sqla/views.py:234 superset/forms.py:56
msgid "Table Name"
msgstr "表名"

#: superset/forms.py:57
msgid "Name of table to be created from csv data."
msgstr "从CSV数据将创建的表的名称."

#: superset/forms.py:61
msgid "CSV File"
msgstr "CSV文件"

#: superset/forms.py:62
msgid "Select a CSV file to be uploaded to a database."
msgstr "选择一个CSV文件上传到数据库."

#: superset/forms.py:64
msgid "CSV Files Only!"
msgstr "仅CSV文件！"

#: superset/connectors/sqla/views.py:227 superset/forms.py:66
#: superset/views/core.py:275 superset/views/sql_lab.py:24
#: superset/views/sql_lab.py:61
msgid "Database"
msgstr "数据库"

#: superset/forms.py:70
msgid "Delimiter"
msgstr "分隔符"

#: superset/forms.py:71
msgid "Delimiter used by CSV file (for whitespace use \\s+)."
msgstr "CSV文件使用的分隔符　(空白请使用 \\s+)"

#: superset/forms.py:75
msgid "Table Exists"
msgstr "表已存在"

#: superset/forms.py:76
msgid ""
"If table exists do one of the following: Fail (do nothing), Replace (drop "
"and recreate table) or Append (insert data)."
msgstr ""
"如果表已存在，执行其中一个：舍弃（什么都不做），替换（删除表并重建），或者追"
"加(插入数据)"

#: superset/forms.py:81
msgid "Fail"
msgstr "失败"

#: superset/forms.py:81
msgid "Replace"
msgstr "替换"

#: superset/forms.py:82
msgid "Append"
msgstr "追加"

#: superset/connectors/sqla/views.py:230 superset/forms.py:85
msgid "Schema"
msgstr "模式"

#: superset/forms.py:86
msgid "Specify a schema (if database flavor supports this)."
msgstr "指定一个Schema(需要数据库支持)"

#: superset/forms.py:91
msgid "Header Row"
msgstr "标题行"

#: superset/forms.py:92
msgid ""
"Row containing the headers to use as column names (0 is first line of data). "
"Leave empty if there is no header row."
msgstr "作为列名的带有标题的行（０是第一行数据）。如果没有标题行则留空。"

#: superset/forms.py:100
msgid "Index Column"
msgstr "索引字段"

#: superset/forms.py:101
msgid ""
"Column to use as the row labels of the dataframe. Leave empty if no index "
"column."
msgstr "字段作为数据文件的行标签使用。如果没有索引字段，则留空。"

#: superset/forms.py:108
msgid "Mangle Duplicate Columns"
msgstr "混合重复列"

#: superset/forms.py:109
msgid "Specify duplicate columns as \"X.0, X.1\"."
msgstr "将重复列指定为“x.0，x.1”。"

#: superset/forms.py:111
msgid "Skip Initial Space"
msgstr "跳过初始空格"

#: superset/forms.py:112
msgid "Skip spaces after delimiter."
msgstr "在分隔符之后跳过空格。"

#: superset/forms.py:114
msgid "Skip Rows"
msgstr "跳过行"

#: superset/forms.py:115
msgid "Number of rows to skip at start of file."
msgstr "在文件开始时跳过的行数。"

#: superset/forms.py:120
msgid "Rows to Read"
msgstr "读取的行"

#: superset/forms.py:121
msgid "Number of rows of file to read."
msgstr "要读取的文件行数。"

#: superset/forms.py:126
msgid "Skip Blank Lines"
msgstr "跳过空白行"

#: superset/forms.py:127
msgid "Skip blank lines rather than interpreting them as NaN values."
msgstr "跳过空白行而不是把它们解释为NaN值。"

#: superset/forms.py:131
msgid "Parse Dates"
msgstr "解析日期"

#: superset/forms.py:132
msgid "A comma separated list of columns that should be parsed as dates."
msgstr "应作为日期解析的列的逗号分隔列表。"

#: superset/forms.py:137
msgid "Infer Datetime Format"
msgstr "日期时间格式"

#: superset/forms.py:138
msgid "Use Pandas to interpret the datetime format automatically."
msgstr "使用Pandas自动解释日期时间格式。"

#: superset/forms.py:142
msgid "Decimal Character"
msgstr "十进制字符"

#: superset/forms.py:143
msgid "Character to interpret as decimal point."
msgstr "将字符解释为小数点的字符。"

#: superset/forms.py:148
msgid "Dataframe Index"
msgstr "Dataframe索引"

#: superset/forms.py:149
msgid "Write dataframe index as a column."
msgstr "将dataframe index 作为列."

#: superset/forms.py:151
msgid "Column Label(s)"
msgstr "字段标签"

#: superset/forms.py:152
msgid ""
"Column label for index column(s). If None is given and Dataframe Index is "
"True, Index Names are used."
msgstr ""
"索引列的列标签。如果为None, 并且数据框索引为 true, 则使用 \"索引名称\"。"

#: superset/utils.py:576
#, python-format
msgid "[Superset] Access to the datasource %(name)s was granted"
msgstr "[Superset] 允许访问数据源 %(name)s"

#: superset/viz.py:65
msgid "Viz is missing a datasource"
msgstr "Viz 缺少一个数据源"

#: superset/viz.py:277
msgid "From date cannot be larger than to date"
msgstr "起始时间不可以大于当前时间"

#: superset/assets/src/explore/visTypes.js:881 superset/viz.py:483
msgid "Table View"
msgstr "表视图"

#: superset/viz.py:495
msgid "Pick a granularity in the Time section or uncheck 'Include Time'"
msgstr "在“时间”部分选择一个粒度，或取消选中“包括时间”"

#: superset/viz.py:505
msgid "Choose either fields to [Group By] and [Metrics] or [Columns], not both"
msgstr "为[分组]和[指标]或[列]选择任何的字段，或者两个都不选"

#: superset/viz.py:587
msgid "Time Table View"
msgstr "时间表视图"

#: superset/viz.py:596 superset/viz.py:1495
msgid "Pick at least one metric"
msgstr "选择至少一个指标"

#: superset/viz.py:599
msgid "When using 'Group By' you are limited to use a single metric"
msgstr "当使用“Group by”时，只限于使用单个度量。"

#: superset/assets/src/explore/visTypes.js:966 superset/viz.py:628
msgid "Pivot Table"
msgstr "透视表"

#: superset/viz.py:642
msgid "Please choose at least one 'Group by' field "
msgstr "请至少选择一个分组字段 "

#: superset/viz.py:644
msgid "Please choose at least one metric"
msgstr "请至少选择一个指标"

#: superset/viz.py:648
msgid "Group By' and 'Columns' can't overlap"
msgstr "“Group by”列和字段不能重叠"

#: superset/assets/src/explore/visTypes.js:952 superset/viz.py:681
msgid "Markup"
msgstr "标记"

#: superset/assets/src/explore/visTypes.js:992 superset/viz.py:703
msgid "Separator"
msgstr "分隔符"

#: superset/assets/src/explore/visTypes.js:1014 superset/viz.py:715
msgid "Word Cloud"
msgstr "词汇云"

#: superset/assets/src/explore/visTypes.js:1036 superset/viz.py:738
msgid "Treemap"
msgstr "树状图"

#: superset/assets/src/explore/visTypes.js:1064 superset/viz.py:764
msgid "Calendar Heatmap"
msgstr "时间热力图"

#: superset/assets/src/explore/visTypes.js:1102 superset/viz.py:829
msgid "Box Plot"
msgstr "箱线图"

#: superset/assets/src/explore/visTypes.js:1124 superset/viz.py:918
msgid "Bubble Chart"
msgstr "气泡图"

#: superset/viz.py:942
msgid "Pick a metric for x, y and size"
msgstr "为 x 轴，y 轴和大小选择一个指标"

#: superset/assets/src/explore/visTypes.js:1174 superset/viz.py:968
msgid "Bullet Chart"
msgstr "子弹图"

#: superset/viz.py:994
msgid "Pick a metric to display"
msgstr "选择一个指标来显示"

#: superset/assets/src/explore/visTypes.js:1198 superset/viz.py:1017
msgid "Big Number with Trendline"
msgstr "数字和趋势线"

#: superset/viz.py:1025 superset/viz.py:1054
msgid "Pick a metric!"
msgstr "选择一个指标！"

#: superset/assets/src/explore/visTypes.js:1225 superset/viz.py:1046
msgid "Big Number"
msgstr "数字"

#: superset/assets/src/explore/visTypes.js:184 superset/viz.py:1073
msgid "Time Series - Line Chart"
msgstr "时间序列-折线图"

#: superset/viz.py:1136 superset/viz.py:1338
msgid "Pick a time granularity for your time series"
msgstr "为您的时间序列选择一个时间粒度"

#: superset/viz.py:1220
msgid ""
"`Since` and `Until` time bounds should be specified when using the `Time "
"Shift` feature."
msgstr "在使用“Time Shift”功能时，应指定“Since”和\"Until\"时间界限。"

#: superset/assets/src/explore/visTypes.js:229 superset/viz.py:1252
msgid "Time Series - Multiple Line Charts"
msgstr "时间序列-多线图"

#: superset/viz.py:1281
msgid "Time Series - Dual Axis Line Chart"
msgstr "时间序列-双轴线图"

#: superset/viz.py:1291
msgid "Pick a metric for left axis!"
msgstr "为左轴选择一个指标！"

#: superset/viz.py:1293
msgid "Pick a metric for right axis!"
msgstr "为右轴选择一个指标！"

#: superset/viz.py:1295
msgid "Please choose different metrics on left and right axis"
msgstr "请在左右轴上选择不同的指标"

#: superset/assets/src/explore/visTypes.js:394 superset/viz.py:1356
msgid "Time Series - Bar Chart"
msgstr "时间序列 - 柱状图"

#: superset/viz.py:1365
msgid "Time Series - Period Pivot"
msgstr "时间序列 - 周期透视表"

#: superset/assets/src/explore/visTypes.js:440 superset/viz.py:1405
msgid "Time Series - Percent Change"
msgstr "时间序列 - 百分比变化"

#: superset/assets/src/explore/visTypes.js:835 superset/viz.py:1413
msgid "Time Series - Stacked"
msgstr "时间序列 - 堆积图"

#: superset/viz.py:1422
msgid "Distribution - NVD3 - Pie Chart"
msgstr "分布 - NVD3 - 饼图"

#: superset/assets/src/explore/visTypes.js:1252 superset/viz.py:1441
msgid "Histogram"
msgstr "直方图"

#: superset/viz.py:1451
msgid "Must have at least one numeric column specified"
msgstr "必须至少指明一个数值列"

#: superset/assets/src/explore/visTypes.js:110 superset/viz.py:1482
msgid "Distribution - Bar Chart"
msgstr "分布 - 柱状图"

#: superset/viz.py:1493
msgid "Can't have overlap between Series and Breakdowns"
msgstr "Series 和 Breakdown 之间不能有重叠"

#: superset/viz.py:1497
msgid "Pick at least one field for [Series]"
msgstr "为 [序列] 选择至少一个字段"

#: superset/assets/src/explore/visTypes.js:1294 superset/viz.py:1551
msgid "Sunburst"
msgstr "环状层次图"

#: superset/assets/src/explore/visTypes.js:1333 superset/viz.py:1582
msgid "Sankey"
msgstr "蛇形图"

#: superset/viz.py:1589
msgid "Pick exactly 2 columns as [Source / Target]"
msgstr "为 [来源 / 目标] 选择两个列"

#: superset/viz.py:1620
msgid ""
"There's a loop in your Sankey, please provide a tree. Here's a faulty link: "
"{}"
msgstr "桑基图里面有一个循环，请提供一棵树。这是一个错误的链接：{}"

#: superset/assets/src/explore/visTypes.js:1361 superset/viz.py:1631
#: superset/viz.py:1652
msgid "Directed Force Layout"
msgstr "有向图"

#: superset/viz.py:1638
msgid "Pick exactly 2 columns to 'Group By'"
msgstr "为 “Group By” 选择两个列"

#: superset/assets/src/explore/visTypes.js:1427 superset/viz.py:1685
msgid "Country Map"
msgstr "国家地图"

#: superset/assets/src/explore/visTypes.js:1461 superset/viz.py:1713
msgid "World Map"
msgstr "世界地图"

#: superset/assets/src/explore/controls.jsx:1840
#: superset/assets/src/explore/visTypes.js:85 superset/viz.py:1763
msgid "Filters"
msgstr "过滤"

#: superset/viz.py:1784
msgid "Pick at least one filter field"
msgstr "选择至少一个过滤字段"

#: superset/assets/src/explore/visTypes.js:1526 superset/viz.py:1809
msgid "iFrame"
msgstr "内嵌框架"

#: superset/assets/src/explore/visTypes.js:1538 superset/viz.py:1829
msgid "Parallel Coordinates"
msgstr "平行坐标"

#: superset/assets/src/explore/visTypes.js:1560 superset/viz.py:1854
msgid "Heatmap"
msgstr "热力图"

#: superset/viz.py:1910
msgid "Horizon Charts"
msgstr "水平图"

#: superset/assets/src/explore/visTypes.js:1621 superset/viz.py:1921
msgid "Mapbox"
msgstr "箱图"

#: superset/viz.py:1936
msgid "Must have a [Group By] column to have 'count' as the [Label]"
msgstr "[Group By] 列必须要有 ‘count’字段作为 [标签]"

#: superset/viz.py:1949
msgid "Choice of [Label] must be present in [Group By]"
msgstr "[标签] 的选择项必须出现在 [Group By]"

#: superset/viz.py:1954
msgid "Choice of [Point Radius] must be present in [Group By]"
msgstr "[点半径] 的选择项必须出现在 [Group By]"

#: superset/viz.py:1959
msgid "[Longitude] and [Latitude] columns must be present in [Group By]"
msgstr "[经度] 和 [纬度] 的选择项必须出现在 [Group By]"

#: superset/assets/src/explore/visTypes.js:481 superset/viz.py:2028
msgid "Deck.gl - Multiple Layers"
msgstr "多图层"

#: superset/viz.py:2067 superset/viz.py:2080
msgid "Bad spatial key"
msgstr "错误的空间字段"

#: superset/assets/src/explore/visTypes.js:768 superset/viz.py:2163
msgid "Deck.gl - Scatter plot"
msgstr "Deck.gl - 散点图"

#: superset/viz.py:2206
msgid "Deck.gl - Screen Grid"
msgstr "Deck.gl - 屏幕网格"

#: superset/viz.py:2228
msgid "Deck.gl - 3D Grid"
msgstr "Deck.gl - 3D网格"

#: superset/assets/src/explore/visTypes.js:573 superset/viz.py:2243
msgid "Deck.gl - Paths"
msgstr "Deck.gl - 路径"

#: superset/assets/src/explore/visTypes.js:690 superset/viz.py:2276
msgid "Deck.gl - Polygon"
msgstr "Deck.gl - 多角形"

#: superset/viz.py:2284
msgid "Deck.gl - 3D HEX"
msgstr "Deck.gl - 3D六角曲面"

#: superset/viz.py:2299
msgid "Deck.gl - GeoJSON"
msgstr "Deck.gl - GeoJson"

#: superset/assets/src/explore/visTypes.js:730 superset/viz.py:2318
msgid "Deck.gl - Arc"
msgstr "Deck.gl - 弧度"

#: superset/assets/src/explore/visTypes.js:1691 superset/viz.py:2342
msgid "Event flow"
msgstr "事件流"

#: superset/assets/src/explore/visTypes.js:1736 superset/viz.py:2373
msgid "Time Series - Paired t-test"
msgstr "时间序列 - 配对t检验"

#: superset/assets/src/explore/visTypes.js:1754 superset/viz.py:2431
msgid "Time Series - Nightingale Rose Chart"
msgstr "时间序列 - 南丁格尔玫瑰图"

#: superset/viz.py:2461
msgid "Partition Diagram"
msgstr "分区图"

#: superset/assets/src/common.js:37
msgid "Your session timed out, please refresh your page and try again."
msgstr "您的会话已超时，请刷新页面后，再重试。"

#: superset/assets/src/SqlLab/actions.js:59
msgid "Your query was saved"
msgstr "您的查询已保存"

#: superset/assets/src/SqlLab/actions.js:60
msgid "Your query could not be saved"
msgstr "您的查询无法保存"

#: superset/assets/src/SqlLab/actions.js:113
msgid "Failed at retrieving results from the results backend"
msgstr "无法从结果后端检索到"

#: superset/assets/src/SqlLab/actions.js:163
msgid "Unknown error"
msgstr "未知错误"

#: superset/assets/src/SqlLab/actions.js:186
msgid "Query was stopped."
msgstr "查询被终止。"

#: superset/assets/src/SqlLab/actions.js:189
msgid "Failed at stopping query."
msgstr "无法终止查询。"

#: superset/assets/src/SqlLab/actions.js:309
#: superset/assets/src/SqlLab/actions.js:322
msgid "Error occurred while fetching table metadata"
msgstr "获取表格元数据时发生错误"

#: superset/assets/src/SqlLab/actions.js:376
msgid "shared query"
msgstr "已分享的查询"

#: superset/assets/src/SqlLab/actions.js:384
#: superset/assets/src/SqlLab/actions.js:404
msgid "The query couldn't be loaded"
msgstr "这个查询无法被加载"

#: superset/assets/src/SqlLab/actions.js:438
msgid "An error occurred while creating the data source"
msgstr "创建数据源时发生错误"

#: superset/assets/src/SqlLab/constants.js:30
msgid "Pick a chart type!"
msgstr "选择一个图表类型！"

#: superset/assets/src/SqlLab/constants.js:31
msgid "To use this chart type you need at least one column flagged as a date"
msgstr "要使用此图表类型，您至少需要一个标记为日期格式的列"

#: superset/assets/src/SqlLab/constants.js:32
msgid "To use this chart type you need at least one dimension"
msgstr "要使用此图表类型，您至少需要一个维度"

#: superset/assets/src/SqlLab/constants.js:33
msgid "To use this chart type you need at least one aggregation function"
msgstr "要使用这种图表类型，您至少需要一个聚合函数"

#: superset/assets/src/SqlLab/components/QueryTable.jsx:49
#: superset/assets/src/SqlLab/components/SqlEditor.jsx:112
#: superset/assets/src/SqlLab/reducers.js:11
msgid "Untitled Query"
msgstr "未命名的查询"

#: superset/assets/src/SqlLab/reducers.js:44
#, python-format
msgid "Copy of %s"
msgstr "%s 的副本"

#: superset/assets/src/SqlLab/components/CopyQueryTabUrl.jsx:30
msgid "share query"
msgstr "分享查询"

#: superset/assets/src/SqlLab/components/CopyQueryTabUrl.jsx:33
#: superset/assets/src/SqlLab/components/ShareQuery.jsx:17
msgid "copy URL to clipboard"
msgstr "拷贝 URL 到剪切板"

#: superset/assets/src/SqlLab/components/HighlightedSql.jsx:61
msgid "Raw SQL"
msgstr "行 SQL"

#: superset/assets/src/SqlLab/components/HighlightedSql.jsx:71
msgid "Source SQL"
msgstr "源 SQL"

#: superset/assets/src/SqlLab/components/HighlightedSql.jsx:83
#: superset/assets/src/explore/visTypes.js:44
msgid "SQL"
msgstr "SQL"

#: superset/assets/src/SqlLab/components/QueryHistory.jsx:28
msgid "No query history yet..."
msgstr "暂无历史查询..."

#: superset/assets/src/SqlLab/components/QuerySearch.jsx:123
#: superset/assets/src/SqlLab/components/SqlEditorLeftBar.jsx:67
msgid "It seems you don't have access to any database"
msgstr "貌似您没有访问到任何数据库"

#: superset/assets/src/SqlLab/components/QuerySearch.jsx:171
#: superset/assets/src/SqlLab/components/ResultSet.jsx:89
msgid "Search Results"
msgstr "搜索结果"

#: superset/assets/src/SqlLab/components/QuerySearch.jsx:177
msgid "[From]-"
msgstr "[From]-"

#: superset/assets/src/SqlLab/components/QuerySearch.jsx:187
msgid "[To]-"
msgstr "[To]-"

#: superset/assets/src/SqlLab/components/QuerySearch.jsx:196
msgid "[Query Status]"
msgstr "[查询状态]"

#: superset/assets/src/SqlLab/components/QuerySearch.jsx:205
msgid "Search"
msgstr "搜索"

#: superset/assets/src/SqlLab/components/QueryTable.jsx:114
msgid "Open in SQL Editor"
msgstr "在 SQL 编辑器中打开"

#: superset/assets/src/SqlLab/components/QueryTable.jsx:133
msgid "view results"
msgstr "展示结果"

#: superset/assets/src/SqlLab/components/QueryTable.jsx:136
msgid "Data preview"
msgstr "数据预览"

#: superset/assets/src/SqlLab/components/QueryTable.jsx:176
msgid "Visualize the data out of this query"
msgstr "从这个查询中可视化数据"

#: superset/assets/src/SqlLab/components/QueryTable.jsx:182
msgid "Overwrite text in editor with a query on this table"
msgstr "使用该表上的查询覆盖编辑器中的文本"

#: superset/assets/src/SqlLab/components/QueryTable.jsx:188
msgid "Run query in a new tab"
msgstr "在新标签中运行查询"

#: superset/assets/src/SqlLab/components/QueryTable.jsx:193
msgid "Remove query from log"
msgstr "从日志中删除查询"

#: superset/assets/src/SqlLab/components/ResultSet.jsx:67
msgid ".CSV"
msgstr ".CSV"

#: superset/assets/src/SqlLab/components/ResultSet.jsx:78
#: superset/assets/src/SqlLab/components/VisualizeModal.jsx:247
#: superset/assets/src/SqlLab/components/VisualizeModal.jsx:286
msgid "Visualize"
msgstr "可视化"

#: superset/assets/src/SqlLab/components/ResultSet.jsx:163
#: superset/connectors/sqla/views.py:88 superset/connectors/sqla/views.py:136
#: superset/connectors/sqla/views.py:225 superset/views/core.py:467
msgid "Table"
msgstr "表"

#: superset/assets/src/SqlLab/components/ResultSet.jsx:163
msgid "was created"
msgstr "已创建"

#: superset/assets/src/SqlLab/components/ResultSet.jsx:170
msgid "Query in a new tab"
msgstr "在新标签中查询"

#: superset/assets/src/SqlLab/components/ResultSet.jsx:211
msgid "Fetch data preview"
msgstr "获取数据预览"

#: superset/assets/src/SqlLab/components/ResultSet.jsx:231
msgid "Track Job"
msgstr "跟踪任务"

#: superset/assets/src/SqlLab/components/ResultSet.jsx:237
msgid "Loading..."
msgstr "加载中..."

#: superset/assets/src/SqlLab/components/RunQueryActionButton.jsx:21
msgid "Run Selected Query"
msgstr "运行选定的查询"

#: superset/assets/src/SqlLab/components/RunQueryActionButton.jsx:21
#: superset/assets/src/components/RefreshChartOverlay.jsx:26
msgid "Run Query"
msgstr "运行查询"

#: superset/assets/src/SqlLab/components/RunQueryActionButton.jsx:36
msgid "Run query synchronously"
msgstr "同步运行查询"

#: superset/assets/src/SqlLab/components/RunQueryActionButton.jsx:48
msgid "Run query asynchronously"
msgstr "异步运行查询"

#: superset/assets/src/SqlLab/components/RunQueryActionButton.jsx:60
msgid "Stop"
msgstr "停止"

#: superset/assets/src/SqlLab/components/SaveQuery.jsx:18
msgid "Undefined"
msgstr "未命名"

#: superset/assets/src/SqlLab/components/SaveQuery.jsx:67
#: superset/views/sql_lab.py:59
msgid "Label"
msgstr "标签"

#: superset/assets/src/SqlLab/components/SaveQuery.jsx:72
msgid "Label for your query"
msgstr "为您的查询设置标签"

#: superset/assets/src/SqlLab/components/SaveQuery.jsx:82
#: superset/connectors/druid/views.py:134
#: superset/connectors/druid/views.py:258 superset/connectors/sqla/views.py:85
#: superset/connectors/sqla/views.py:132 superset/connectors/sqla/views.py:238
#: superset/views/core.py:461 superset/views/sql_lab.py:62
msgid "Description"
msgstr "描述"

#: superset/assets/src/SqlLab/components/SaveQuery.jsx:86
msgid "Write a description for your query"
msgstr "为您的查询写一段描述"

#: superset/assets/src/SqlLab/components/SaveQuery.jsx:100
#: superset/assets/src/dashboard/components/Controls.jsx:125
#: superset/assets/src/dashboard/components/SaveModal.jsx:151
#: superset/assets/src/explore/components/SaveModal.jsx:221
msgid "Save"
msgstr "保存"

#: superset/assets/src/SqlLab/components/SaveQuery.jsx:103
#: superset/templates/superset/request_access.html:16
msgid "Cancel"
msgstr "取消"

#: superset/assets/src/SqlLab/components/SaveQuery.jsx:115
#: superset/assets/src/SqlLab/components/SaveQuery.jsx:119
msgid "Save Query"
msgstr "保存查询"

#: superset/assets/src/SqlLab/components/ShareQuery.jsx:14
msgid "Share Query"
msgstr "分享查询"

#: superset/assets/src/SqlLab/components/SouthPane.jsx:52
msgid "Run a query to display results here"
msgstr "运行一个查询，以在此显示结果"

#: superset/assets/src/SqlLab/components/SouthPane.jsx:57
#, python-format
msgid "Preview for %s"
msgstr "预览 %s"

#: superset/assets/src/SqlLab/components/SouthPane.jsx:81
msgid "Results"
msgstr "结果"

#: superset/assets/src/SqlLab/components/SouthPane.jsx:87
msgid "Query History"
msgstr "历史查询"

#: superset/assets/src/SqlLab/components/SqlEditor.jsx:165
msgid "Create table as with query results"
msgstr "与查询结果一样创建表"

#: superset/assets/src/SqlLab/components/SqlEditor.jsx:173
msgid "new table name"
msgstr "新表名称"

#: superset/assets/src/SqlLab/components/SqlEditorLeftBar.jsx:91
msgid "Error while fetching table list"
msgstr "获取表列表时出错"

#: superset/assets/src/SqlLab/components/SqlEditorLeftBar.jsx:132
msgid "Error while fetching schema list"
msgstr "获取模式列表时出错"

#: superset/assets/src/SqlLab/components/SqlEditorLeftBar.jsx:146
msgid "Type to search ..."
msgstr "键入搜索 ..."

#: superset/assets/src/SqlLab/components/SqlEditorLeftBar.jsx:148
msgid "Select table "
msgstr "选择表"

#: superset/assets/src/SqlLab/components/SqlEditorLeftBar.jsx:162
msgid "Error while fetching database list"
msgstr "获取数据库列表时出错"

#: superset/assets/src/SqlLab/components/SqlEditorLeftBar.jsx:168
msgid "Database:"
msgstr "数据库："

#: superset/assets/src/SqlLab/components/SqlEditorLeftBar.jsx:172
msgid "Select a database"
msgstr "选择一个数据库"

#: superset/assets/src/SqlLab/components/SqlEditorLeftBar.jsx:179
#, python-format
msgid "Select a schema (%s)"
msgstr "选择一个模式（%s）"

#: superset/assets/src/SqlLab/components/SqlEditorLeftBar.jsx:184
msgid "Schema:"
msgstr "模式："

#: superset/assets/src/SqlLab/components/SqlEditorLeftBar.jsx:198
#, python-format
msgid "Add a table (%s)"
msgstr "增加一张表（%s）"

#: superset/assets/src/SqlLab/components/SqlEditorLeftBar.jsx:234
msgid "Reset State"
msgstr "状态重置"

#: superset/assets/src/SqlLab/components/TabbedSqlEditors.jsx:106
msgid "Enter a new title for the tab"
msgstr "输入标签的新标题"

#: superset/assets/src/SqlLab/components/TabbedSqlEditors.jsx:125
#, python-format
msgid "Untitled Query %s"
msgstr "未命名的查询 %s"

#: superset/assets/src/SqlLab/components/TabbedSqlEditors.jsx:171
msgid "close tab"
msgstr "关闭标签"

#: superset/assets/src/SqlLab/components/TabbedSqlEditors.jsx:174
msgid "rename tab"
msgstr "重命名标签"

#: superset/assets/src/SqlLab/components/TabbedSqlEditors.jsx:182
msgid "expand tool bar"
msgstr "展开工具栏"

#: superset/assets/src/SqlLab/components/TabbedSqlEditors.jsx:182
msgid "hide tool bar"
msgstr "隐藏工具栏"

#: superset/assets/src/SqlLab/components/TableElement.jsx:75
msgid "Copy partition query to clipboard"
msgstr "将分区查询复制到剪贴板"

#: superset/assets/src/SqlLab/components/TableElement.jsx:94
msgid "latest partition:"
msgstr "最新分区："

#: superset/assets/src/SqlLab/components/TableElement.jsx:110
msgid "Keys for table"
msgstr "表的键"

#: superset/assets/src/SqlLab/components/TableElement.jsx:119
#, python-format
msgid "View keys & indexes (%s)"
msgstr "查看键和索引（%s）"

#: superset/assets/src/SqlLab/components/TableElement.jsx:135
msgid "Sort columns alphabetically"
msgstr "对列按字母顺序进行排列"

#: superset/assets/src/SqlLab/components/TableElement.jsx:136
msgid "Original table column order"
msgstr "原始表列顺序"

#: superset/assets/src/SqlLab/components/TableElement.jsx:146
msgid "Copy SELECT statement to clipboard"
msgstr "将 SELECT 语句复制到剪贴板"

#: superset/assets/src/SqlLab/components/TableElement.jsx:152
msgid "Remove table preview"
msgstr "删除表格预览"

#: superset/assets/src/SqlLab/components/TemplateParamsEditor.jsx:102
msgid "Template Parameters"
msgstr "模板参数"

#: superset/assets/src/SqlLab/components/TemplateParamsEditor.jsx:106
msgid "Edit template parameters"
msgstr "编辑模板参数"

#: superset/assets/src/SqlLab/components/TemplateParamsEditor.jsx:116
msgid "Invalid JSON"
msgstr "无效的JSON"

#: superset/assets/src/SqlLab/components/VisualizeModal.jsx:92
#, python-format
msgid ""
"%s is not right as a column name, please alias it (as in SELECT count(*) "
msgstr "%s 作为列名称不正确，请别名（如SELECT count(*) "

#: superset/assets/src/SqlLab/components/VisualizeModal.jsx:93
msgid "AS my_alias"
msgstr "作为 my_alias"

#: superset/assets/src/SqlLab/components/VisualizeModal.jsx:93
msgid "using only alphanumeric characters and underscores"
msgstr "只使用字母、数字、字符和下划线"

#: superset/assets/src/SqlLab/components/VisualizeModal.jsx:171
msgid "Creating a data source and popping a new tab"
msgstr "创建数据源，并弹出一个新的标签页"

#: superset/assets/src/SqlLab/components/VisualizeModal.jsx:202
msgid "No results available for this query"
msgstr "没有可用于此查询的结果"

#: superset/assets/src/SqlLab/components/VisualizeModal.jsx:254
#: superset/assets/src/explore/visTypes.js:285
msgid "Chart Type"
msgstr "图表类型"

#: superset/assets/src/SqlLab/components/VisualizeModal.jsx:257
msgid "[Chart Type]"
msgstr "[图表类型]"

#: superset/assets/src/SqlLab/components/VisualizeModal.jsx:265
msgid "Datasource Name"
msgstr "数据库名称"

#: superset/assets/src/SqlLab/components/VisualizeModal.jsx:269
msgid "datasource name"
msgstr "数据库名称"

#: superset/assets/src/addSlice/AddSliceContainer.jsx:59
msgid "Create a new chart"
msgstr "创建新图表"

#: superset/assets/src/addSlice/AddSliceContainer.jsx:61
#: superset/assets/src/addSlice/AddSliceContainer.jsx:69
msgid "Choose a datasource"
msgstr "选择数据源"

#: superset/assets/src/addSlice/AddSliceContainer.jsx:75
msgid ""
"If the datasource your are looking for is not available in the list, follow "
"the instructions on the how to add it on the "
msgstr "如果您正在寻找的数据源在列表中不可用，请按照说明进行添加"

#: superset/assets/src/addSlice/AddSliceContainer.jsx:79
msgid "Superset tutorial"
msgstr "Superset 教程"

#: superset/assets/src/addSlice/AddSliceContainer.jsx:84
#: superset/assets/src/addSlice/AddSliceContainer.jsx:91
msgid "Choose a visualization type"
msgstr "选择可视化类型"

#: superset/assets/src/addSlice/AddSliceContainer.jsx:101
msgid "Create new chart"
msgstr "创建新图表"

#: superset/assets/src/chart/chartAction.js:169
msgid "Unexpected error: "
msgstr "意外错误："

#: superset/assets/src/chart/chartAction.js:178
msgid "Unexpected error."
msgstr "意外错误。"

#: superset/assets/src/chart/chartReducer.js:55
msgid "Updating chart was stopped"
msgstr "更新图表已停止"

#: superset/assets/src/chart/chartReducer.js:66
#, python-format
msgid "An error occurred while rendering the visualization: %s"
msgstr "渲染可视化时发生错误：%s"

#: superset/assets/src/chart/chartReducer.js:74
msgid "visualization queries are set to timeout at ${action.timeout} seconds. "
msgstr "可视化查询超时设置为  ${action.timeout} 秒。"

#: superset/assets/src/chart/chartReducer.js:75
msgid ""
"Perhaps your data has grown, your database is under unusual load, or you are "
"simply querying a data source that is too large to be processed within the "
"timeout range. If that is the case, we recommend that you summarize your "
"data further."
msgstr ""
"未来您的数据增长后，数据库可能会处于异常负载下，或者您在查询超时范围内处理的"
"了太大的数据源。我们建议你进一步汇总您的数据。"

#: superset/assets/src/chart/chartReducer.js:84
#: superset/assets/src/chart/chartReducer.js:134
msgid "Network error."
msgstr "网络异常。"

#: superset/assets/src/components/AlteredSliceTag.jsx:113
msgid "Click to see difference"
msgstr "点击查看差异"

#: superset/assets/src/components/AlteredSliceTag.jsx:119
msgid "Altered"
msgstr "已更改"

#: superset/assets/src/components/AlteredSliceTag.jsx:137
msgid "Chart changes"
msgstr "图表变化"

#: superset/assets/src/components/AsyncSelect.jsx:23
#: superset/assets/src/explore/components/controls/SelectAsyncControl.jsx:27
msgid "Select ..."
msgstr "选择 ..."

#: superset/assets/src/components/CachedLabel.jsx:26
msgid "Loaded data cached"
msgstr "数据缓存已加载"

#: superset/assets/src/components/CachedLabel.jsx:29
msgid "Loaded from cache"
msgstr "从缓存中加载"

#: superset/assets/src/components/CachedLabel.jsx:33
msgid "Click to force-refresh"
msgstr "点击强制刷新"

#: superset/assets/src/components/CopyToClipboard.jsx:21
#: superset/assets/src/components/URLShortLinkButton.jsx:38
#: superset/assets/src/explore/components/EmbedCodeButton.jsx:68
msgid "Copy to clipboard"
msgstr "复制到剪贴板"

#: superset/assets/src/components/CopyToClipboard.jsx:72
msgid "Not successful"
msgstr "未成功"

#: superset/assets/src/components/CopyToClipboard.jsx:75
msgid "Sorry, your browser does not support copying. Use Ctrl / Cmd + C!"
msgstr "抱歉，您的浏览器不支持复制操作。使用 Ctrl / Cmd + C！"

#: superset/assets/src/components/CopyToClipboard.jsx:91
msgid "Copied!"
msgstr "复制成功！"

#: superset/assets/src/components/EditableTitle.jsx:14
#: superset/views/core.py:571 superset/views/core.py:641
msgid "Title"
msgstr "标题"

#: superset/assets/src/components/EditableTitle.jsx:105
msgid "click to edit title"
msgstr "点击编辑标题"

#: superset/assets/src/components/EditableTitle.jsx:106
msgid "You don't have the rights to alter this title."
msgstr "你没有权利改变这个标题。"

#: superset/assets/src/components/FaveStar.jsx:33
msgid "Click to favorite/unfavorite"
msgstr "点击 收藏/取消收藏"

#: superset/assets/src/components/RefreshChartOverlay.jsx:32
msgid "Dismiss"
msgstr "忽略"

#: superset/assets/src/components/URLShortLinkButton.jsx:33
#, python-format
msgid "%s%s"
msgstr "%s%s"

#: superset/assets/src/dashboard/components/CodeModal.jsx:35
msgid "Active Dashboard Filters"
msgstr "活跃的仪表板过滤器"

#: superset/assets/src/dashboard/components/Controls.jsx:120
#, python-format
msgid "Checkout this dashboard: %s"
msgstr "查看这个仪表板：%s"

#: superset/assets/src/dashboard/components/Controls.jsx:123
#: superset/assets/src/explore/components/SaveModal.jsx:163
msgid "Save as"
msgstr "另存为"

#: superset/assets/src/dashboard/components/Controls.jsx:131
msgid "Force Refresh"
msgstr "强制刷新"

#: superset/assets/src/dashboard/components/Controls.jsx:132
msgid "Force refresh the whole dashboard"
msgstr "强制刷新整个仪表板"

#: superset/assets/src/dashboard/components/Controls.jsx:140
msgid "Set autorefresh"
msgstr "设置自动刷新"

#: superset/assets/src/dashboard/components/Controls.jsx:141
msgid "Set the auto-refresh interval for this session"
msgstr "设置此会话的自动刷新间隔"

#: superset/assets/src/dashboard/components/Controls.jsx:156
msgid "Save the dashboard"
msgstr "保存仪表板"

#: superset/assets/src/dashboard/components/Controls.jsx:164
msgid "Edit properties"
msgstr "编辑属性"

#: superset/assets/src/dashboard/components/Controls.jsx:165
msgid "Edit the dashboards's properties"
msgstr "编辑仪表板的属性"

#: superset/assets/src/dashboard/components/Controls.jsx:172
msgid "Email"
msgstr "邮箱"

#: superset/assets/src/dashboard/components/Controls.jsx:173
msgid "Email a link to this dashboard"
msgstr "将这个仪表板链接通过Email发送"

#: superset/assets/src/dashboard/components/Controls.jsx:185
#: superset/assets/src/dashboard/components/SliceAdder.jsx:196
msgid "Add Charts"
msgstr "添加图表"

#: superset/assets/src/dashboard/components/Controls.jsx:186
msgid "Add some charts to this dashboard"
msgstr "在该仪表板中添加一些图表"

#: superset/assets/src/dashboard/components/Controls.jsx:197
msgid "Edit CSS"
msgstr "编辑CSS"

#: superset/assets/src/dashboard/components/Controls.jsx:198
msgid "Change the style of the dashboard using CSS code"
msgstr "使用CSS代码更改仪表板的样式"

#: superset/assets/src/dashboard/components/CssEditor.jsx:45
msgid "Load a template"
msgstr "加载一个模板"

#: superset/assets/src/dashboard/components/CssEditor.jsx:48
msgid "Load a CSS template"
msgstr "加载一个 CSS 模板"

#: superset/assets/src/dashboard/components/CssEditor.jsx:60
#: superset/views/core.py:578
msgid "CSS"
msgstr "CSS"

#: superset/assets/src/dashboard/components/CssEditor.jsx:66
msgid "Live CSS Editor"
msgstr "现场 CSS 编辑器"

#: superset/assets/src/dashboard/components/Dashboard.jsx:156
msgid "You have unsaved changes."
msgstr "您有一些未保存的修改。"

#: superset/assets/src/dashboard/components/Header.jsx:50
msgid "Unsaved changes"
msgstr "更改未保存"

#: superset/assets/src/dashboard/components/RefreshIntervalModal.jsx:19
msgid "Don't refresh"
msgstr "不要刷新"

#: superset/assets/src/dashboard/components/RefreshIntervalModal.jsx:20
msgid "10 seconds"
msgstr "10秒钟"

#: superset/assets/src/dashboard/components/RefreshIntervalModal.jsx:21
msgid "30 seconds"
msgstr "30秒钟"

#: superset/assets/src/dashboard/components/RefreshIntervalModal.jsx:22
msgid "1 minute"
msgstr "1分钟"

#: superset/assets/src/dashboard/components/RefreshIntervalModal.jsx:23
msgid "5 minutes"
msgstr "5分钟"

#: superset/assets/src/dashboard/components/RefreshIntervalModal.jsx:24
msgid "30 minutes"
msgstr "30分钟"

#: superset/assets/src/dashboard/components/RefreshIntervalModal.jsx:25
msgid "1 hour"
msgstr "1小时"

#: superset/assets/src/dashboard/components/RefreshIntervalModal.jsx:26
msgid "6 hours"
msgstr "6个小时"

#: superset/assets/src/dashboard/components/RefreshIntervalModal.jsx:27
msgid "12 hours"
msgstr "12个小时"

#: superset/assets/src/dashboard/components/RefreshIntervalModal.jsx:28
msgid "24 hours"
msgstr "24 小时"

#: superset/assets/src/dashboard/components/RefreshIntervalModal.jsx:43
msgid "Refresh Interval"
msgstr "刷新间隔"

#: superset/assets/src/dashboard/components/RefreshIntervalModal.jsx:46
msgid "Choose the refresh frequency for this dashboard"
msgstr "选择此仪表板的刷新频率"

#: superset/assets/src/dashboard/components/SaveModal.jsx:66
msgid "This dashboard was saved successfully."
msgstr "该仪表板已成功保存。"

#: superset/assets/src/dashboard/components/SaveModal.jsx:72
msgid "Sorry, there was an error saving this dashboard: "
msgstr "抱歉，保存此信息中心时发生错误"

#: superset/assets/src/dashboard/components/SaveModal.jsx:95
msgid "Error"
msgstr "异常"

#: superset/assets/src/dashboard/components/SaveModal.jsx:96
msgid "You must pick a name for the new dashboard"
msgstr "您必须为新的仪表板选择一个名称"

#: superset/assets/src/dashboard/components/SaveModal.jsx:111
msgid "Save Dashboard"
msgstr "保存仪表板"

#: superset/assets/src/dashboard/components/SaveModal.jsx:119
#, python-format
msgid "Overwrite Dashboard [%s]"
msgstr "覆盖仪表板 [%s]"

#: superset/assets/src/dashboard/components/SaveModal.jsx:127
msgid "Save as:"
msgstr "另存为："

#: superset/assets/src/dashboard/components/SaveModal.jsx:131
#: superset/assets/src/explore/components/SaveModal.jsx:209
msgid "[dashboard name]"
msgstr "[看板名称]"

#: superset/assets/src/dashboard/components/SliceAdder.jsx:73
msgid "Sorry, there was an error fetching charts to this dashboard: "
msgstr "抱歉，这个仪表板在获取图表时发生错误："

#: superset/assets/src/dashboard/components/SliceAdder.jsx:93
msgid "Sorry, there was an error adding charts to this dashboard: "
msgstr "抱歉，这个仪表板在添加图表时发生错误："

#: superset/assets/src/dashboard/components/SliceAdder.jsx:163
#: superset/views/core.py:466
msgid "Name"
msgstr "名字"

#: superset/assets/src/dashboard/components/SliceAdder.jsx:169
msgid "Viz"
msgstr "Viz"

#: superset/assets/src/dashboard/components/SliceAdder.jsx:177
#: superset/assets/src/explore/controls.jsx:187
#: superset/connectors/druid/views.py:52 superset/views/core.py:404
#: superset/views/core.py:428 superset/views/core.py:460
msgid "Datasource"
msgstr "数据源"

#: superset/assets/src/dashboard/components/SliceAdder.jsx:186
#: superset/views/core.py:576 superset/views/core.py:643
#: superset/views/sql_lab.py:63
msgid "Modified"
msgstr "已修改"

#: superset/assets/src/dashboard/components/SliceAdder.jsx:205
msgid "Add a new chart to the dashboard"
msgstr "在仪表板中添加新图表"

#: superset/assets/src/dashboard/components/SliceAdder.jsx:211
msgid "Add Charts to Dashboard"
msgstr "在仪表板中添加图表"

#: superset/assets/src/dashboard/components/SliceHeader.jsx:65
#, python-format
msgid "Served from data cached %s . Click to force refresh."
msgstr "数据缓存 %s 。点击强制刷新。"

#: superset/assets/src/dashboard/components/SliceHeader.jsx:66
msgid "Force refresh data"
msgstr "强制刷新数据"

#: superset/assets/src/dashboard/components/SliceHeader.jsx:67
msgid "Annotation layers are still loading."
msgstr "注释层仍在加载。"

#: superset/assets/src/dashboard/components/SliceHeader.jsx:68
msgid "One ore more annotation layers failed loading."
msgstr "一个或多个注释层加载失败。"

#: superset/assets/src/dashboard/components/SliceHeader.jsx:107
msgid "Move chart"
msgstr "移动图表"

#: superset/assets/src/dashboard/components/SliceHeader.jsx:127
msgid "Toggle chart description"
msgstr "切换图表说明"

#: superset/assets/src/dashboard/components/SliceHeader.jsx:138
msgid "Edit chart"
msgstr "编辑图表"

#: superset/assets/src/dashboard/components/SliceHeader.jsx:148
msgid "Export CSV"
msgstr "导出 CSV"

#: superset/assets/src/dashboard/components/SliceHeader.jsx:158
msgid "Explore chart"
msgstr "探索图表"

#: superset/assets/src/dashboard/components/SliceHeader.jsx:169
msgid "Remove chart from dashboard"
msgstr "从仪表板中删除图表"

#: superset/assets/src/explore/controls.jsx:85
msgid ""
"A reference to the [Time] configuration, taking granularity into account"
msgstr "参考 [时间] 配置，考虑粒度"

#: superset/assets/src/explore/controls.jsx:99
msgid "Group by"
msgstr "分组"

#: superset/assets/src/explore/controls.jsx:102
msgid "One or many controls to group by"
msgstr "一个或多个控件来分组"

#: superset/assets/src/explore/controls.jsx:121
msgid "Metrics"
msgstr "指标"

#: superset/assets/src/explore/controls.jsx:135
#: superset/assets/src/explore/controls.jsx:226
msgid "One or many metrics to display"
msgstr "一个或多个指标显示"

#: superset/assets/src/explore/controls.jsx:140
#: superset/assets/src/explore/visTypes.js:1452
#: superset/connectors/druid/views.py:133 superset/connectors/sqla/views.py:131
msgid "Metric"
msgstr "指标"

#: superset/assets/src/explore/controls.jsx:149
msgid ""
"For more information about objects are in context in the scope of this "
"function, refer to the"
msgstr "有关对象在该函数范围内的上下文的更多信息，请参见"

#: superset/assets/src/explore/controls.jsx:151
msgid " source code of Superset's sandboxed parser"
msgstr "sandboxed解析器的源代码"

#: superset/assets/src/explore/controls.jsx:173
msgid ""
"This functionality is disabled in your environment for security reasons."
msgstr "出于安全原因，该功能在您的环境中被禁用。"

#: superset/assets/src/explore/controls.jsx:197 superset/views/core.py:468
msgid "Visualization Type"
msgstr "图表类型"

#: superset/assets/src/explore/controls.jsx:199
msgid "The type of visualization to display"
msgstr "要显示的可视化类型"

#: superset/assets/src/explore/controls.jsx:205
msgid "Percentage Metrics"
msgstr "百分比度量"

#: superset/assets/src/explore/controls.jsx:207
msgid "Metrics for which percentage of total are to be displayed"
msgstr "要显示总数百分比的度量"

#: superset/assets/src/explore/controls.jsx:212
msgid "Y Axis Bounds"
msgstr "Y 轴界限"

#: superset/assets/src/explore/controls.jsx:215
msgid ""
"Bounds for the Y axis. When left empty, the bounds are dynamically defined "
"based on the min/max of the data. Note that this feature will only expand "
"the axis range. It won't narrow the data's extent."
msgstr ""
"Y轴的边界。当空时，边界是根据数据的最小/最大值动态定义的。请注意，此功能只会"
"扩展轴范围。它不会缩小数据范围。"

#: superset/assets/src/explore/controls.jsx:224
msgid "Ordering"
msgstr "排序"

#: superset/assets/src/explore/controls.jsx:232
msgid "Fixed Color"
msgstr "固定色"

#: superset/assets/src/explore/controls.jsx:233
msgid "Use this to define a static color for all circles"
msgstr "使用此定义所有圆圈的静态颜色"

#: superset/assets/src/explore/controls.jsx:240
msgid "Legend Position"
msgstr "图例位置"

#: superset/assets/src/explore/controls.jsx:241
msgid "Choose the position of the legend"
msgstr "选择图例的位置"

#: superset/assets/src/explore/controls.jsx:255
msgid "Fill Color"
msgstr "填充颜色"

#: superset/assets/src/explore/controls.jsx:256
#: superset/assets/src/explore/controls.jsx:264
msgid ""
" Set the opacity to 0 if you do not want to override the color specified in "
"the GeoJSON"
msgstr "如果不想重写GeoJSON中指定的颜色，则将不透明度设置为0。"

#: superset/assets/src/explore/controls.jsx:263
msgid "Stroke Color"
msgstr "笔划颜色"

#: superset/assets/src/explore/controls.jsx:272
msgid "Right Axis Metric"
msgstr "右轴指标"

#: superset/assets/src/explore/controls.jsx:274
msgid "Choose a metric for right axis"
msgstr "为右轴选择一个指标"

#: superset/assets/src/explore/controls.jsx:279
msgid "Stacked Style"
msgstr "堆积的样式"

#: superset/assets/src/explore/controls.jsx:292
msgid "Sort X Axis"
msgstr "排序X轴"

#: superset/assets/src/explore/controls.jsx:300
msgid "Sort Y Axis"
msgstr "排序Y轴"

#: superset/assets/src/explore/controls.jsx:308
msgid "Linear Color Scheme"
msgstr "线性颜色方案"

#: superset/assets/src/explore/controls.jsx:333
msgid "Normalize Across"
msgstr "标准化通过"

#: superset/assets/src/explore/controls.jsx:340
msgid ""
"Color will be rendered based on a ratio of the cell against the sum of "
"across this criteria"
msgstr "颜色将根据单元格与整个标准之和的比率来展示"

#: superset/assets/src/explore/controls.jsx:347
msgid "Horizon Color Scale"
msgstr "地平线颜色比例"

#: superset/assets/src/explore/controls.jsx:354
msgid "Defines how the color are attributed."
msgstr "定义如何分配颜色。"

#: superset/assets/src/explore/controls.jsx:359
msgid "Rendering"
msgstr "渲染"

#: superset/assets/src/explore/controls.jsx:366
msgid ""
"image-rendering CSS attribute of the canvas object that defines how the "
"browser scales up the image"
msgstr "图像渲染画布对象的 CSS 属性，它定义了浏览器如何放大图像"

#: superset/assets/src/explore/controls.jsx:372
msgid "XScale Interval"
msgstr "X轴比例尺间隔"

#: superset/assets/src/explore/controls.jsx:377
msgid "Number of steps to take between ticks when displaying the X scale"
msgstr "显示 X 刻度时，在刻度之间表示的步骤数"

#: superset/assets/src/explore/controls.jsx:383
msgid "YScale Interval"
msgstr "Y轴比例尺间隔"

#: superset/assets/src/explore/controls.jsx:388
msgid "Number of steps to take between ticks when displaying the Y scale"
msgstr "显示 Y 刻度时，在刻度之间表示的步骤数"

#: superset/assets/src/explore/controls.jsx:394
msgid "Include Time"
msgstr "包括时间"

#: superset/assets/src/explore/controls.jsx:395
msgid "Whether to include the time granularity as defined in the time section"
msgstr "是否包含时间段中定义的时间粒度"

#: superset/assets/src/explore/controls.jsx:401
msgid "Auto Zoom"
msgstr "自动缩放"

#: superset/assets/src/explore/controls.jsx:404
msgid "When checked, the map will zoom to your data after each query"
msgstr "选中后，地图将根据您的数据进行缩放。"

#: superset/assets/src/explore/controls.jsx:409
msgid "Show percentage"
msgstr "显示百分比"

#: superset/assets/src/explore/controls.jsx:411
msgid "Whether to include the percentage in the tooltip"
msgstr "是否在工具提示中包含百分比"

#: superset/assets/src/explore/controls.jsx:417
msgid "Stacked Bars"
msgstr "堆叠条形图"

#: superset/assets/src/explore/controls.jsx:425
msgid "Show totals"
msgstr "显示总计"

#: superset/assets/src/explore/controls.jsx:428
msgid "Display total row/column"
msgstr "显示总行 / 列"

#: superset/assets/src/explore/controls.jsx:433
msgid "Show Markers"
msgstr "显示标记"

#: superset/assets/src/explore/controls.jsx:436
msgid "Show data points as circle markers on the lines"
msgstr "将数据点显示为线条上的圆形标记"

#: superset/assets/src/explore/controls.jsx:441
msgid "Bar Values"
msgstr "条形栏的值"

#: superset/assets/src/explore/controls.jsx:444
msgid "Show the value on top of the bar"
msgstr "显示栏上的值"

#: superset/assets/src/explore/controls.jsx:449
msgid "Sort Bars"
msgstr "排序条形栏"

#: superset/assets/src/explore/controls.jsx:452
msgid "Sort bars by x labels."
msgstr "按 x 标签排序。"

#: superset/assets/src/explore/controls.jsx:457
msgid "Combine Metrics"
msgstr "整合指标"

#: superset/assets/src/explore/controls.jsx:459
msgid ""
"Display metrics side by side within each column, as opposed to each column "
"being displayed side by side for each metric."
msgstr "在每个列中并排显示指标，而不是每个指标并排显示每个列。"

#: superset/assets/src/explore/controls.jsx:465
msgid "Extra Controls"
msgstr "额外的控制"

#: superset/assets/src/explore/controls.jsx:468
msgid ""
"Whether to show extra controls or not. Extra controls include things like "
"making mulitBar charts stacked or side by side."
msgstr "是否显示额外的控件。额外的控制包括使多栏图表堆叠或并排。"

#: superset/assets/src/explore/controls.jsx:475
msgid "Reduce X ticks"
msgstr "减少 X 轴的刻度"

#: superset/assets/src/explore/controls.jsx:478
msgid ""
"Reduces the number of X axis ticks to be rendered. If true, the x axis wont "
"overflow and labels may be missing. If false, a minimum width will be "
"applied to columns and the width may overflow into an horizontal scroll."
msgstr ""
"减少要渲染的 X 轴刻度的数量。如果为 true，则 X 轴不会溢出，标签可能会丢失。如"
"果为 false，则最小宽度将应用于列，并且宽度可能会溢出，并以水平滚动条展示。"

#: superset/assets/src/explore/controls.jsx:487
msgid "Include Series"
msgstr "包括序列"

#: superset/assets/src/explore/controls.jsx:490
msgid "Include series name as an axis"
msgstr "包含序列名称作为一个轴"

#: superset/assets/src/explore/controls.jsx:495
msgid "Color Metric"
msgstr "颜色指标"

#: superset/assets/src/explore/controls.jsx:497
msgid "A metric to use for color"
msgstr "用于颜色的指标"

#: superset/assets/src/explore/controls.jsx:501
msgid "Country Name"
msgstr "国家的名字"

#: superset/assets/src/explore/controls.jsx:521
msgid "The name of country that Superset should display"
msgstr "Superset 应显示的国家名称"

#: superset/assets/src/explore/controls.jsx:525
msgid "Country Field Type"
msgstr "国家字段的类型"

#: superset/assets/src/explore/controls.jsx:533
msgid ""
"The country code standard that Superset should expect to find in the "
"[country] column"
msgstr "Superset 希望能够在 [国家] 栏中找到的 国家 / 地区 的标准代码"

#: superset/assets/src/explore/controls.jsx:539
msgid "Frequency"
msgstr "频率"

#: superset/assets/src/explore/controls.jsx:551
msgid ""
"The periodicity over which to pivot time. Users can provide\n"
"      \"Pandas\" offset alias.\n"
"      Click on the info bubble for more details on accepted \"freq\" "
"expressions."
msgstr ""
"旋转时间的周期性。用户可以提供\n"
"“Pandas”别名。\n"
"点击信息气泡以获得更多关于“freq”表达式的细节。"

#: superset/assets/src/explore/controls.jsx:564
msgid "Dimension"
msgstr "尺寸"

#: superset/assets/src/explore/controls.jsx:565
msgid "Select a dimension"
msgstr "选择一个维度"

#: superset/assets/src/explore/controls.jsx:571
#: superset/assets/src/explore/controls.jsx:578
msgid "Columns"
msgstr "列"

#: superset/assets/src/explore/controls.jsx:572
msgid "One or many controls to pivot as columns"
msgstr "一个或多个控件作为主列"

#: superset/assets/src/explore/controls.jsx:580
#: superset/assets/src/explore/controls.jsx:683
#: superset/assets/src/explore/controls.jsx:693
msgid "Columns to display"
msgstr "要显示的列"

#: superset/assets/src/explore/controls.jsx:591
msgid "Longitude & Latitude"
msgstr "经纬度"

#: superset/assets/src/explore/controls.jsx:593
#: superset/assets/src/explore/controls.jsx:603
#: superset/assets/src/explore/controls.jsx:613
msgid "Point to your spatial columns"
msgstr "指向你的空间列"

#: superset/assets/src/explore/controls.jsx:601
msgid "Start Longitude & Latitude"
msgstr "开始经纬度"

#: superset/assets/src/explore/controls.jsx:611
msgid "End Longitude & Latitude"
msgstr "经纬度结束"

#: superset/assets/src/explore/controls.jsx:621
#: superset/assets/src/explore/visTypes.js:1666
msgid "Longitude"
msgstr "经度"

#: superset/assets/src/explore/controls.jsx:624
msgid "Select the longitude column"
msgstr "选择经度列"

#: superset/assets/src/explore/controls.jsx:632
#: superset/assets/src/explore/visTypes.js:1670
msgid "Latitude"
msgstr "纬度"

#: superset/assets/src/explore/controls.jsx:635
msgid "Select the latitude column"
msgstr "选择纬度列"

#: superset/assets/src/explore/controls.jsx:643
msgid "GeoJson Column"
msgstr "GeoJson 列"

#: superset/assets/src/explore/controls.jsx:645
msgid "Select the geojson column"
msgstr "选择列"

#: superset/assets/src/explore/controls.jsx:653
msgid "Polygon Column"
msgstr "多边形列"

#: superset/assets/src/explore/controls.jsx:655
msgid ""
"Select the polygon column. Each row should contain JSON.array(N) of "
"[longitude, latitude] points"
msgstr "选择多边形列。每行应该包含 [经度，纬度] 点的JSON.array(N)"

#: superset/assets/src/explore/controls.jsx:664
msgid "Point Radius Scale"
msgstr "点半径比例尺"

#: superset/assets/src/explore/controls.jsx:673
msgid "Stroke Width"
msgstr "行程宽度"

#: superset/assets/src/explore/controls.jsx:702
msgid "Origin"
msgstr "起点"

#: superset/assets/src/explore/controls.jsx:708
msgid ""
"Defines the origin where time buckets start, accepts natural dates as in "
"`now`, `sunday` or `1970-01-01`"
msgstr "定义时间桶的起点，接受 `now`，`sunday` 或 `1970-01-01` 的自然日期"

#: superset/assets/src/explore/controls.jsx:716
msgid "Bottom Margin"
msgstr "底部边距"

#: superset/assets/src/explore/controls.jsx:720
msgid "Bottom margin, in pixels, allowing for more room for axis labels"
msgstr "底部边距，以像素为单位，为轴标签留出更多空间"

#: superset/assets/src/explore/controls.jsx:725
msgid "X Tick Layout"
msgstr "X轴记号图层"

#: superset/assets/src/explore/controls.jsx:730
msgid "The way the ticks are laid out on the X axis"
msgstr "记号在X轴上的排列方式"

#: superset/assets/src/explore/controls.jsx:737
msgid "Left Margin"
msgstr "左边距"

#: superset/assets/src/explore/controls.jsx:741
msgid "Left margin, in pixels, allowing for more room for axis labels"
msgstr "左边距，以像素为单位，为轴标签留出更多空间"

#: superset/assets/src/explore/controls.jsx:747
msgid "Time Granularity"
msgstr "可视化的时间粒度"

#: superset/assets/src/explore/controls.jsx:765
msgid ""
"The time granularity for the visualization. Note that you can type and use "
"simple natural language as in `10 seconds`, `1 day` or `56 weeks`"
msgstr ""
"可视化的时间粒度。请注意，您可以输入和使用简单的自然语言，如 `10 秒`，`1 天` "
"或 `56 周`"

#: superset/assets/src/explore/controls.jsx:772
msgid "Domain"
msgstr "域"

#: superset/assets/src/explore/controls.jsx:775
msgid "The time unit used for the grouping of blocks"
msgstr "用于块分组的时间单位"

#: superset/assets/src/explore/controls.jsx:780
msgid "Subdomain"
msgstr "子域"

#: superset/assets/src/explore/controls.jsx:783
msgid ""
"The time unit for each block. Should be a smaller unit than "
"domain_granularity. Should be larger or equal to Time Grain"
msgstr ""
"每个块的时间单位。应该是比 domain_granularity 更小的单位。应该大于或等于 "
"Time Grain"

#: superset/assets/src/explore/controls.jsx:790
msgid "Link Length"
msgstr "链接长度"

#: superset/assets/src/explore/controls.jsx:793
msgid "Link length in the force layout"
msgstr "在力布局中的链接长度"

#: superset/assets/src/explore/controls.jsx:799
msgid "Charge"
msgstr "充电"

#: superset/assets/src/explore/controls.jsx:813
msgid "Charge in the force layout"
msgstr "在力布局中充电"

#: superset/assets/src/explore/controls.jsx:819
msgid ""
"The time column for the visualization. Note that you can define arbitrary "
"expression that return a DATETIME column in the table. Also note that the "
"filter below is applied against this column or expression"
msgstr ""
"可视化的时间栏。注意，您可以定义返回表中的DATETIMLE列的任意表达式。还请注意下"
"面的筛选器应用于该列或表达式。"

#: superset/assets/src/explore/controls.jsx:845
msgid "Time Grain"
msgstr "时间的粒度"

#: superset/assets/src/explore/controls.jsx:847
msgid ""
"The time granularity for the visualization. This applies a date "
"transformation to alter your time column and defines a new time granularity. "
"The options here are defined on a per database engine basis in the Superset "
"source code."
msgstr ""
"可视化的时间粒度。这将应用日期转换来更改时间列，并定义新的时间粒度。这里的选"
"项是在 Superset 源代码中的每个数据库引擎基础上定义的。"

#: superset/assets/src/explore/controls.jsx:860
msgid "Resample Rule"
msgstr "重新取样规则"

#: superset/assets/src/explore/controls.jsx:863
msgid "Pandas resample rule"
msgstr "Pandas 重新采样的规则"

#: superset/assets/src/explore/controls.jsx:869
msgid "Resample How"
msgstr "如何重新采样"

#: superset/assets/src/explore/controls.jsx:872
msgid "Pandas resample how"
msgstr "Pandas 如何重新采样的规则"

#: superset/assets/src/explore/controls.jsx:878
msgid "Resample Fill Method"
msgstr "重新采样的填充方法"

#: superset/assets/src/explore/controls.jsx:881
msgid "Pandas resample fill method"
msgstr "Pandas 重新采样的填充方法"

#: superset/assets/src/explore/controls.jsx:887
#: superset/assets/src/visualizations/filter_box.jsx:114
msgid "Since"
msgstr "以来"

#: superset/assets/src/explore/controls.jsx:888
msgid "7 days ago"
msgstr "7 天前"

#: superset/assets/src/explore/controls.jsx:894
#: superset/assets/src/visualizations/filter_box.jsx:123
msgid "Until"
msgstr "直到"

#: superset/assets/src/explore/controls.jsx:901
msgid "Max Bubble Size"
msgstr "最大泡泡的尺寸"

#: superset/assets/src/explore/controls.jsx:909
msgid "Whisker/outlier options"
msgstr "（箱须图的）须 / 异常值选项"

#: superset/assets/src/explore/controls.jsx:911
msgid "Determines how whiskers and outliers are calculated."
msgstr "确定如何计算（箱须图的）胡须和异常值。"

#: superset/assets/src/explore/controls.jsx:922
msgid "Ratio"
msgstr "比率"

#: superset/assets/src/explore/controls.jsx:926
msgid "Target aspect ratio for treemap tiles."
msgstr "树形图中瓦片的目标高宽比。"

#: superset/assets/src/explore/controls.jsx:932
#: superset/assets/src/explore/visTypes.js:1219
#: superset/assets/src/explore/visTypes.js:1246
#: superset/assets/src/explore/visTypes.js:1409
msgid "Number format"
msgstr "数字格式"

#: superset/assets/src/explore/controls.jsx:942
msgid "Row limit"
msgstr "行限制"

#: superset/assets/src/explore/controls.jsx:951
msgid "Series limit"
msgstr "序列限制"

#: superset/assets/src/explore/controls.jsx:954
msgid ""
"Limits the number of time series that get displayed. A sub query (or an "
"extra phase where sub queries are not supported) is applied to limit the "
"number of time series that get fetched and displayed. This feature is useful "
"when grouping by high cardinality dimension(s)."
msgstr ""
"限制显示的时间序列的数量。应用子查询（或者不支持子查询）来限制获取和显示的时"
"间序列的数量。在高基数维度（S）分组时，此特性是有用的。"

#: superset/assets/src/explore/controls.jsx:963
msgid "Sort By"
msgstr "Sort By（以什么排序）"

#: superset/assets/src/explore/controls.jsx:965
msgid "Metric used to define the top series"
msgstr "用于定义顶级序列的指标"

#: superset/assets/src/explore/controls.jsx:973
msgid "Sort Descending"
msgstr "降序"

#: superset/assets/src/explore/controls.jsx:975
msgid "Whether to sort descending or ascending"
msgstr "是降序还是升序排序"

#: superset/assets/src/explore/controls.jsx:980
msgid "Rolling"
msgstr "滚动"

#: superset/assets/src/explore/controls.jsx:983
msgid ""
"Defines a rolling window function to apply, works along with the [Periods] "
"text box"
msgstr "定义要应用的滚动窗口函数，与 [Periods] 文本框一起使用"

#: superset/assets/src/explore/controls.jsx:989
msgid "Multiplier"
msgstr "乘数"

#: superset/assets/src/explore/controls.jsx:993
msgid "Factor to multiply the metric by"
msgstr "因子乘以度量"

#: superset/assets/src/explore/controls.jsx:998
msgid "Periods"
msgstr "期限"

#: superset/assets/src/explore/controls.jsx:1000
msgid ""
"Defines the size of the rolling window function, relative to the time "
"granularity selected"
msgstr "定义滚动窗口函数的大小，相对于所选的时间粒度"

#: superset/assets/src/explore/controls.jsx:1010
msgid "Cell Size"
msgstr "单元尺寸"

#: superset/assets/src/explore/controls.jsx:1011
msgid "The size of the square cell, in pixels"
msgstr "平方单元的大小，以像素为单位"

#: superset/assets/src/explore/controls.jsx:1020
msgid "Cell Padding"
msgstr "细胞填充"

#: superset/assets/src/explore/controls.jsx:1021
msgid "The distance between cells, in pixels"
msgstr "单元格之间的距离，以像素为单位"

#: superset/assets/src/explore/controls.jsx:1030
msgid "Cell Radius"
msgstr "单元格半径"

#: superset/assets/src/explore/controls.jsx:1031
msgid "The pixel radius"
msgstr "像素半径"

#: superset/assets/src/explore/controls.jsx:1040
msgid "Color Steps"
msgstr "色彩Steps"

#: superset/assets/src/explore/controls.jsx:1041
msgid "The number color \"steps\""
msgstr "色彩Steps数字"

#: superset/assets/src/explore/controls.jsx:1046
msgid "Grid Size"
msgstr "网格大小"

#: superset/assets/src/explore/controls.jsx:1050
msgid "Defines the grid size in pixels"
msgstr "定义网格像素大小"

#: superset/assets/src/explore/controls.jsx:1055
msgid "Min Periods"
msgstr "最小的期限"

#: superset/assets/src/explore/controls.jsx:1057
msgid ""
"The minimum number of rolling periods required to show a value. For instance "
"if you do a cumulative sum on 7 days you may want your \"Min Period\" to be "
"7, so that all data points shown are the total of 7 periods. This will hide "
"the \"ramp up\" taking place over the first 7 periods"
msgstr ""
"显示值所需的滚动周期的最小数量。例如，如果您想累积 7 天的总额，您可能希望您"
"的“最短期限”为 7，以便显示的所有数据点都是 7 个期间的总和。这将隐藏掉前 7 个"
"阶段的“加速”效果"

#: superset/assets/src/explore/controls.jsx:1066
#: superset/assets/src/explore/visTypes.js:147
msgid "Series"
msgstr "序列"

#: superset/assets/src/explore/controls.jsx:1068
msgid ""
"Defines the grouping of entities. Each series is shown as a specific color "
"on the chart and has a legend toggle"
msgstr "定义实体的分组。每个系列在图表上显示为特定颜色，并有一个可切换的图例"

#: superset/assets/src/explore/controls.jsx:1078
msgid "Entity"
msgstr "实体"

#: superset/assets/src/explore/controls.jsx:1081
msgid "This defines the element to be plotted on the chart"
msgstr "这定义了要在图表上绘制的元素"

#: superset/assets/src/explore/controls.jsx:1089
#: superset/assets/src/explore/visTypes.js:137
#: superset/assets/src/explore/visTypes.js:200
#: superset/assets/src/explore/visTypes.js:244
#: superset/assets/src/explore/visTypes.js:325
#: superset/assets/src/explore/visTypes.js:411
#: superset/assets/src/explore/visTypes.js:452
#: superset/assets/src/explore/visTypes.js:850
#: superset/assets/src/explore/visTypes.js:1145
msgid "X Axis"
msgstr "X 轴"

#: superset/assets/src/explore/controls.jsx:1090
msgid "Metric assigned to the [X] axis"
msgstr "分配给 [X] 轴的指标"

#: superset/assets/src/explore/controls.jsx:1096
#: superset/assets/src/explore/visTypes.js:209
#: superset/assets/src/explore/visTypes.js:333
#: superset/assets/src/explore/visTypes.js:420
#: superset/assets/src/explore/visTypes.js:461
#: superset/assets/src/explore/visTypes.js:859
#: superset/assets/src/explore/visTypes.js:1154
msgid "Y Axis"
msgstr "Y 轴"

#: superset/assets/src/explore/controls.jsx:1098
msgid "Metric assigned to the [Y] axis"
msgstr "分配给 [Y] 轴的指标"

#: superset/assets/src/explore/controls.jsx:1103
msgid "Bubble Size"
msgstr "泡泡大小"

#: superset/assets/src/explore/controls.jsx:1109
msgid "URL"
msgstr "URL 地址"

#: superset/assets/src/explore/controls.jsx:1110
msgid ""
"The URL, this control is templated, so you can integrate {{ width }} and/or "
"{{ height }} in your URL string."
msgstr ""
"URL 网址，此控件是模板化的，所以您可以在您的网址字符串中整合 {{ width }} "
"和 / 或 {{ height }}。"

#: superset/assets/src/explore/controls.jsx:1117
msgid "X Axis Label"
msgstr "X 轴标签"

#: superset/assets/src/explore/controls.jsx:1124
msgid "Y Axis Label"
msgstr "Y 轴标签"

#: superset/assets/src/explore/controls.jsx:1131
msgid "Custom WHERE clause"
msgstr "自定义 WHERE 子句"

#: superset/assets/src/explore/controls.jsx:1137
msgid ""
"The text in this box gets included in your query's WHERE clause, as an AND "
"to other criteria. You can include complex expression, parenthesis and "
"anything else supported by the backend it is directed towards."
msgstr ""
"此框中的文本被包含在查询的 WHERE 子句中，作为与其他条件的 AND 关联。你可以包"
"含复杂的表达式、圆括号和任何后端支持的其他东西。"

#: superset/assets/src/explore/controls.jsx:1145
msgid "Custom HAVING clause"
msgstr "自定义 HAVING 子句"

#: superset/assets/src/explore/controls.jsx:1151
msgid ""
"The text in this box gets included in your query's HAVING clause, as an AND "
"to other criteria. You can include complex expression, parenthesis and "
"anything else supported by the backend it is directed towards."
msgstr ""
"此框中的文本被包含在查询的 HAVING 子句中，作为与其他条件的 AND 关联。你可以包"
"含复杂的表达式、圆括号和任何后端支持的其他东西。"

#: superset/assets/src/explore/controls.jsx:1159
msgid "Comparison Period Lag"
msgstr "比较期延迟"

#: superset/assets/src/explore/controls.jsx:1161
msgid "Based on granularity, number of time periods to compare against"
msgstr "根据粒度，比较的时间段数量"

#: superset/assets/src/explore/controls.jsx:1166
msgid "Comparison suffix"
msgstr "比较后缀"

#: superset/assets/src/explore/controls.jsx:1167
msgid "Suffix to apply after the percentage display"
msgstr "在显示百分比后应用后缀"

#: superset/assets/src/explore/controls.jsx:1173
msgid "Table Timestamp Format"
msgstr "表时间戳格式"

#: superset/assets/src/explore/controls.jsx:1179
msgid "Timestamp Format"
msgstr "时间戳格式"

#: superset/assets/src/explore/controls.jsx:1185
msgid "Series Height"
msgstr "序列高度"

#: superset/assets/src/explore/controls.jsx:1188
msgid "Pixel height of each series"
msgstr "每个序列的像素高度"

#: superset/assets/src/explore/controls.jsx:1195
msgid "Page Length"
msgstr "页面长度"

#: superset/assets/src/explore/controls.jsx:1198
msgid "Rows per page, 0 means no pagination"
msgstr "每页行数，0 表示没有分页"

#: superset/assets/src/explore/controls.jsx:1204
#: superset/assets/src/explore/controls.jsx:1214
msgid "X Axis Format"
msgstr "X 轴格式"

#: superset/assets/src/explore/controls.jsx:1224
msgid "Y Axis Format"
msgstr "Y 轴格式"

#: superset/assets/src/explore/controls.jsx:1236
msgid "When `Period Ratio` is set, the Y Axis Format is forced to `.1%`"
msgstr "当设置“周期比”时，y轴格式强制为“1%”。"

#: superset/assets/src/explore/controls.jsx:1245
msgid "Right Axis Format"
msgstr "右轴格式"

#: superset/assets/src/explore/controls.jsx:1254
msgid "Date Time Format"
msgstr "时间格式"

#: superset/assets/src/explore/controls.jsx:1263
msgid "Markup Type"
msgstr "Markup 格式"

#: superset/assets/src/explore/controls.jsx:1268
msgid "Pick your favorite markup language"
msgstr "选择您最爱的 Markup 语言"

#: superset/assets/src/explore/controls.jsx:1273
msgid "Rotation"
msgstr "反转"

#: superset/assets/src/explore/controls.jsx:1276
msgid "Rotation to apply to words in the cloud"
msgstr "旋转适用于云中的单词"

#: superset/assets/src/explore/controls.jsx:1281
msgid "Line Style"
msgstr "线条样式"

#: superset/assets/src/explore/controls.jsx:1286
msgid "Line interpolation as defined by d3.js"
msgstr "由 d3.js 定义的线插值"

#: superset/assets/src/explore/controls.jsx:1291
msgid "Label Type"
msgstr "标签类型"

#: superset/assets/src/explore/controls.jsx:1301
msgid "What should be shown on the label?"
msgstr "什么应该被显示在标签上？"

#: superset/assets/src/explore/controls.jsx:1306
#: superset/assets/src/explore/visTypes.js:955
#: superset/assets/src/explore/visTypes.js:995
msgid "Code"
msgstr "代码"

#: superset/assets/src/explore/controls.jsx:1307
msgid "Put your code here"
msgstr "把您的代码放在这里"

#: superset/assets/src/explore/controls.jsx:1316
msgid "Aggregation function"
msgstr "聚合功能"

#: superset/assets/src/explore/controls.jsx:1328
msgid ""
"Aggregate function to apply when pivoting and computing the total rows and "
"columns"
msgstr "在旋转和计算总的行和列时，应用聚合函数"

#: superset/assets/src/explore/controls.jsx:1335
msgid "Font Size From"
msgstr "字型大小从"

#: superset/assets/src/explore/controls.jsx:1337
msgid "Font size for the smallest value in the list"
msgstr "列表中最小值的字体大小"

#: superset/assets/src/explore/controls.jsx:1343
msgid "Font Size To"
msgstr "字型大小到"

#: superset/assets/src/explore/controls.jsx:1345
msgid "Font size for the biggest value in the list"
msgstr "列表中最大值的字体大小"

#: superset/assets/src/explore/controls.jsx:1350
msgid "Instant Filtering"
msgstr "即时过滤"

#: superset/assets/src/explore/controls.jsx:1361
msgid "Extruded"
msgstr "突出"

#: superset/assets/src/explore/controls.jsx:1369
msgid "Show Range Filter"
msgstr "显示范围过滤器"

#: superset/assets/src/explore/controls.jsx:1378
msgid "Whether to display the time range interactive selector"
msgstr "是否显示时间范围交互选择器"

#: superset/assets/src/explore/controls.jsx:1383
msgid "Date Filter"
msgstr "日期过滤器"

#: superset/assets/src/explore/controls.jsx:1385
msgid "Whether to include a time filter"
msgstr "是否包含时间过滤器"

#: superset/assets/src/explore/controls.jsx:1390
msgid "Show SQL Granularity Dropdown"
msgstr "显示SQL Granularity Dropdown"

#: superset/assets/src/explore/controls.jsx:1392
msgid "Check to include SQL Granularity dropdown"
msgstr "检查是否包含SQL粒度下拉"

#: superset/assets/src/explore/controls.jsx:1397
msgid "Show SQL Time Column"
msgstr "显示SQL时间列"

#: superset/assets/src/explore/controls.jsx:1399
msgid "Check to include Time Column dropdown"
msgstr "检查包含时间列 Dropdown"

#: superset/assets/src/explore/controls.jsx:1404
msgid "Show Druid Granularity Dropdown"
msgstr "显示 Druid Granularity Dropdown"

#: superset/assets/src/explore/controls.jsx:1406
msgid "Check to include Druid Granularity dropdown"
msgstr "检查包含Druid Granularity Dropdown"

#: superset/assets/src/explore/controls.jsx:1411
msgid "Show Druid Time Origin"
msgstr "显示Druid原始时间"

#: superset/assets/src/explore/controls.jsx:1413
msgid "Check to include Time Origin dropdown"
msgstr "检查包含Time Origin dropdown"

#: superset/assets/src/explore/controls.jsx:1418
msgid "Data Table"
msgstr "数据表"

#: superset/assets/src/explore/controls.jsx:1420
msgid "Whether to display the interactive data table"
msgstr "是否显示交互式数据表"

#: superset/assets/src/explore/controls.jsx:1425
msgid "Search Box"
msgstr "搜索框"

#: superset/assets/src/explore/controls.jsx:1428
msgid "Whether to include a client side search box"
msgstr "是否包含客户端搜索框"

#: superset/assets/src/explore/controls.jsx:1433
msgid "Table Filter"
msgstr "表格过滤器"

#: superset/assets/src/explore/controls.jsx:1436
msgid "Whether to apply filter when table cell is clicked"
msgstr "单击表单元格时是否应用筛选器"

#: superset/assets/src/explore/controls.jsx:1441
msgid "Align +/-"
msgstr "对齐 +/-"

#: superset/assets/src/explore/controls.jsx:1444
msgid "Whether to align the background chart for +/- values"
msgstr "是否 +/- 对齐背景图数值"

#: superset/assets/src/explore/controls.jsx:1449
msgid "Color +/-"
msgstr "色彩 +/-"

#: superset/assets/src/explore/controls.jsx:1452
msgid "Whether to color +/- values"
msgstr "是否 +/- 颜色数值"

#: superset/assets/src/explore/controls.jsx:1457
msgid "Show Bubbles"
msgstr "显示气泡"

#: superset/assets/src/explore/controls.jsx:1460
msgid "Whether to display bubbles on top of countries"
msgstr "是否在国家之上展示气泡"

#: superset/assets/src/explore/controls.jsx:1465
msgid "Legend"
msgstr "图例"

#: superset/assets/src/explore/controls.jsx:1468
msgid "Whether to display the legend (toggles)"
msgstr "是否显示图例（切换）"

#: superset/assets/src/explore/controls.jsx:1473
msgid "Show Values"
msgstr "显示值"

#: superset/assets/src/explore/controls.jsx:1476
msgid "Whether to display the numerical values within the cells"
msgstr "是否在单元格内显示数值"

#: superset/assets/src/explore/controls.jsx:1481
msgid "Show Metric Names"
msgstr "显示度量名"

#: superset/assets/src/explore/controls.jsx:1484
msgid "Whether to display the metric name as a title"
msgstr "是否将度量名显示为标题"

#: superset/assets/src/explore/controls.jsx:1489
msgid "X bounds"
msgstr "X界限"

#: superset/assets/src/explore/controls.jsx:1492
msgid "Whether to display the min and max values of the X axis"
msgstr "是否显示X轴的最小值和最大值"

#: superset/assets/src/explore/controls.jsx:1497
msgid "Y bounds"
msgstr "Y界限"

#: superset/assets/src/explore/controls.jsx:1500
msgid "Whether to display the min and max values of the Y axis"
msgstr "是否显示Y轴的最小值和最大值"

#: superset/assets/src/explore/controls.jsx:1505
msgid "Rich Tooltip"
msgstr "丰富的工具提示"

#: superset/assets/src/explore/controls.jsx:1508
msgid "The rich tooltip shows a list of all series for that point in time"
msgstr "丰富的工具提示显示了该时间点的所有系列的列表。"

#: superset/assets/src/explore/controls.jsx:1514
msgid "Y Log Scale"
msgstr "Y经度标度"

#: superset/assets/src/explore/controls.jsx:1517
msgid "Use a log scale for the Y axis"
msgstr "Y轴使用经度刻度"

#: superset/assets/src/explore/controls.jsx:1522
msgid "X Log Scale"
msgstr "X经度标度"

#: superset/assets/src/explore/controls.jsx:1525
msgid "Use a log scale for the X axis"
msgstr "X轴使用经度刻度"

#: superset/assets/src/explore/controls.jsx:1530
msgid "Log Scale"
msgstr "对数标度"

#: superset/assets/src/explore/controls.jsx:1533
msgid "Use a log scale"
msgstr "使用对数刻度"

#: superset/assets/src/explore/controls.jsx:1538
msgid "Donut"
msgstr "圆环图"

#: superset/assets/src/explore/controls.jsx:1541
msgid "Do you want a donut or a pie?"
msgstr "您想要圆环图饼还是饼图？"

#: superset/assets/src/explore/controls.jsx:1546
msgid "Put labels outside"
msgstr "把标签放在外面"

#: superset/assets/src/explore/controls.jsx:1549
msgid "Put the labels outside the pie?"
msgstr "把标签放在饼图外？"

#: superset/assets/src/explore/controls.jsx:1554
msgid "Contribution"
msgstr "贡献"

#: superset/assets/src/explore/controls.jsx:1556
msgid "Compute the contribution to the total"
msgstr "计算对总数的贡献"

#: superset/assets/src/explore/controls.jsx:1561
msgid "Period Ratio"
msgstr "周期比"

#: superset/assets/src/explore/controls.jsx:1564
msgid ""
"[integer] Number of period to compare against, this is relative to the "
"granularity selected"
msgstr "[integer]要比较的周期数，这与所选的粒度有关。"

#: superset/assets/src/explore/controls.jsx:1570
msgid "Period Ratio Type"
msgstr "周期比率型"

#: superset/assets/src/explore/controls.jsx:1573
msgid ""
"`factor` means (new/previous), `growth` is ((new/previous) - 1), `value` is "
"(new-previous)"
msgstr ""
"“factor”是指 (new/previous)，“growth”是 ((new/previous) - 1)，“value”是 (new-"
"previous)"

#: superset/assets/src/explore/controls.jsx:1581
msgid "Time Shift"
msgstr "时移"

#: superset/assets/src/explore/controls.jsx:1590
msgid ""
"Overlay one or more timeseries from a relative time period. Expects relative "
"time deltas in natural language (example:  24 hours, 7 days, 56 weeks, 365 "
"days)"
msgstr ""
"从相对时间段覆盖一个或多个时间序列。期望自然语言中的相对时间增量（例如：24小"
"时、7天、56周、365天）"

#: superset/assets/src/explore/controls.jsx:1598
msgid "Subheader"
msgstr "子标题"

#: superset/assets/src/explore/controls.jsx:1599
msgid "Description text that shows up below your Big Number"
msgstr "在大数字下面显示描述文本"

#: superset/assets/src/explore/controls.jsx:1605
msgid "label"
msgstr "标签"

#: superset/assets/src/explore/controls.jsx:1607
msgid ""
"`count` is COUNT(*) if a group by is used. Numerical columns will be "
"aggregated with the aggregator. Non-numerical columns will be used to label "
"points. Leave empty to get a count of points in each cluster."
msgstr ""
"“count”是count（*）。数值列将与聚合器聚合。非数值列将用于维度列。留空以获得每"
"个簇中的点计数。"

#: superset/assets/src/explore/controls.jsx:1618
msgid "Map Style"
msgstr "地图样式"

#: superset/assets/src/explore/controls.jsx:1630
msgid "Base layer map style"
msgstr "地图基本层样式"

#: superset/assets/src/explore/controls.jsx:1636
msgid "Clustering Radius"
msgstr "簇半径"

#: superset/assets/src/explore/controls.jsx:1649
msgid ""
"The radius (in pixels) the algorithm uses to define a cluster. Choose 0 to "
"turn off clustering, but beware that a large number of points (>1000) will "
"cause lag."
msgstr ""
"算法用来定义一个簇的半径（以像素为单位）。选择0关闭聚，但要注意大量的点（＞"
"1000）会导致处理时间变长。"

#: superset/assets/src/explore/controls.jsx:1656
#: superset/assets/src/explore/visTypes.js:798
msgid "Point Size"
msgstr "泡泡大小"

#: superset/assets/src/explore/controls.jsx:1658
msgid "Fixed point radius"
msgstr "固定的点半径"

#: superset/assets/src/explore/controls.jsx:1666
msgid "Point Radius"
msgstr "点半径"

#: superset/assets/src/explore/controls.jsx:1668
msgid ""
"The radius of individual points (ones that are not in a cluster). Either a "
"numerical column or `Auto`, which scales the point based on the largest "
"cluster"
msgstr ""
"单个点的半径（不在簇中的点）。一个数值列或“AUTO”，它根据最大的聚类来缩放点。"

#: superset/assets/src/explore/controls.jsx:1678
msgid "Point Radius Unit"
msgstr "点半径单位"

#: superset/assets/src/explore/controls.jsx:1681
#: superset/assets/src/explore/controls.jsx:1697
msgid "The unit of measure for the specified point radius"
msgstr "指定点半径的度量单位"

#: superset/assets/src/explore/controls.jsx:1686
msgid "Point Unit"
msgstr "点单位"

#: superset/assets/src/explore/controls.jsx:1702
msgid "Opacity"
msgstr "不透明度"

#: superset/assets/src/explore/controls.jsx:1705
msgid "Opacity of all clusters, points, and labels. Between 0 and 1."
msgstr "所有簇、点和标签的不透明度。在0到1之间。"

#: superset/assets/src/explore/controls.jsx:1711
#: superset/assets/src/explore/visTypes.js:1657
msgid "Viewport"
msgstr "视口"

#: superset/assets/src/explore/controls.jsx:1713
msgid "Parameters related to the view and perspective on the map"
msgstr "与视图和透视图相关的参数"

#: superset/assets/src/explore/controls.jsx:1722
msgid "Zoom"
msgstr "缩放"

#: superset/assets/src/explore/controls.jsx:1725
msgid "Zoom level of the map"
msgstr "地图缩放等级"

#: superset/assets/src/explore/controls.jsx:1731
msgid "Default latitude"
msgstr "默认纬度"

#: superset/assets/src/explore/controls.jsx:1734
msgid "Latitude of default viewport"
msgstr "默认视口纬度"

#: superset/assets/src/explore/controls.jsx:1740
msgid "Default longitude"
msgstr "默认经度"

#: superset/assets/src/explore/controls.jsx:1743
msgid "Longitude of default viewport"
msgstr "默认视口经度"

#: superset/assets/src/explore/controls.jsx:1749
msgid "Live render"
msgstr "实时渲染"

#: superset/assets/src/explore/controls.jsx:1751
msgid "Points and clusters will update as viewport is being changed"
msgstr "点和簇将随着视图改变而更新。"

#: superset/assets/src/explore/controls.jsx:1757
msgid "RGB Color"
msgstr "RGB颜色"

#: superset/assets/src/explore/controls.jsx:1767
msgid "The color for points and clusters in RGB"
msgstr "点和簇的颜色（RGB）"

#: superset/assets/src/explore/controls.jsx:1772
msgid "Color"
msgstr "颜色"

#: superset/assets/src/explore/controls.jsx:1774
msgid "Pick a color"
msgstr "选择一个颜色"

#: superset/assets/src/explore/controls.jsx:1779
msgid "Ranges"
msgstr "范围"

#: superset/assets/src/explore/controls.jsx:1781
msgid "Ranges to highlight with shading"
msgstr "用阴影突出显示的范围"

#: superset/assets/src/explore/controls.jsx:1786
msgid "Range labels"
msgstr "范围标签"

#: superset/assets/src/explore/controls.jsx:1788
msgid "Labels for the ranges"
msgstr "范围标签"

#: superset/assets/src/explore/controls.jsx:1793
msgid "Markers"
msgstr "标记"

#: superset/assets/src/explore/controls.jsx:1795
msgid "List of values to mark with triangles"
msgstr "用三角形标记的值的列表"

#: superset/assets/src/explore/controls.jsx:1800
msgid "Marker labels"
msgstr "标记标签"

#: superset/assets/src/explore/controls.jsx:1802
msgid "Labels for the markers"
msgstr "标记标签"

#: superset/assets/src/explore/controls.jsx:1807
msgid "Marker lines"
msgstr "标记线"

#: superset/assets/src/explore/controls.jsx:1809
msgid "List of values to mark with lines"
msgstr "用行标记的值列表"

#: superset/assets/src/explore/controls.jsx:1814
msgid "Marker line labels"
msgstr "标记线标签"

#: superset/assets/src/explore/controls.jsx:1816
msgid "Labels for the marker lines"
msgstr "标记线标签"

#: superset/assets/src/explore/controls.jsx:1865
msgid "Chart ID"
msgstr "图表 ID"

#: superset/assets/src/explore/controls.jsx:1867
msgid "The id of the active chart"
msgstr "活动图表的ID"

#: superset/assets/src/explore/controls.jsx:1872
msgid "Cache Timeout (seconds)"
msgstr "缓存超时（秒）"

#: superset/assets/src/explore/controls.jsx:1874
msgid "The number of seconds before expiring the cache"
msgstr "终止缓存前的时间（秒）"

#: superset/assets/src/explore/controls.jsx:1879
msgid "Order by entity id"
msgstr "按实体ID排序"

#: superset/assets/src/explore/controls.jsx:1880
msgid ""
"Important! Select this if the table is not already sorted by entity id, else "
"there is no guarantee that all events for each entity are returned."
msgstr ""
"重要！如果表尚未按实体id排序，则选择此选项，否则无法保证返回每个实体的所有事"
"件。"

#: superset/assets/src/explore/controls.jsx:1888
msgid "Minimum leaf node event count"
msgstr "最小的叶节点的事件计数"

#: superset/assets/src/explore/controls.jsx:1891
msgid ""
"Leaf nodes that represent fewer than this number of events will be initially "
"hidden in the visualization"
msgstr "表示少于该事件数量的叶节点将首先隐藏在可视化中。"

#: superset/assets/src/explore/controls.jsx:1897
#: superset/assets/src/explore/visTypes.js:29
msgid "Color Scheme"
msgstr "配色方案"

#: superset/assets/src/explore/controls.jsx:1901
msgid "The color scheme for rendering chart"
msgstr "绘制图的配色方案"

#: superset/assets/src/explore/controls.jsx:1907
msgid "Significance Level"
msgstr "显著水平"

#: superset/assets/src/explore/controls.jsx:1909
msgid "Threshold alpha level for determining significance"
msgstr "确定临界值的α水平"

#: superset/assets/src/explore/controls.jsx:1914
msgid "p-value precision"
msgstr "概率值精度"

#: superset/assets/src/explore/controls.jsx:1916
msgid "Number of decimal places with which to display p-values"
msgstr "用以显示概率值的小数位数"

#: superset/assets/src/explore/controls.jsx:1921
msgid "Lift percent precision"
msgstr "提高百分比精度"

#: superset/assets/src/explore/controls.jsx:1923
msgid "Number of decimal places with which to display lift values"
msgstr "用以显示提升值的小数位数"

#: superset/assets/src/explore/controls.jsx:1928
msgid "Time Series Columns"
msgstr "时间序列的列"

#: superset/assets/src/explore/controls.jsx:1935
msgid "Use Area Proportions"
msgstr "使用面积比例"

#: superset/assets/src/explore/controls.jsx:1936
msgid ""
"Check if the Rose Chart should use segment area instead of segment radius "
"for proportioning"
msgstr "检查玫瑰图是否应使用分段面积代替分段半径"

#: superset/assets/src/explore/controls.jsx:1946
#: superset/assets/src/explore/visTypes.js:905
#: superset/assets/src/explore/visTypes.js:1025
#: superset/assets/src/explore/visTypes.js:1373
#: superset/assets/src/explore/visTypes.js:1438
#: superset/assets/src/explore/visTypes.js:1529
#: superset/assets/src/explore/visTypes.js:1551
msgid "Options"
msgstr "选项"

#: superset/assets/src/explore/controls.jsx:1952
msgid "Not Time Series"
msgstr "没有时间序列"

#: superset/assets/src/explore/controls.jsx:1954
msgid "Ignore time"
msgstr "忽略时间"

#: superset/assets/src/explore/controls.jsx:1957
msgid "Time Series"
msgstr "时间序列"

#: superset/assets/src/explore/controls.jsx:1959
msgid "Standard time series"
msgstr "标准时间序列"

#: superset/assets/src/explore/controls.jsx:1962
msgid "Aggregate Mean"
msgstr "聚和平均数"

#: superset/assets/src/explore/controls.jsx:1964
msgid "Mean of values over specified period"
msgstr "指定周期内的平均值"

#: superset/assets/src/explore/controls.jsx:1967
msgid "Aggregate Sum"
msgstr "合计"

#: superset/assets/src/explore/controls.jsx:1969
msgid "Sum of values over specified period"
msgstr "指定周期内的合计"

#: superset/assets/src/explore/controls.jsx:1972
msgid "Difference"
msgstr "差异"

#: superset/assets/src/explore/controls.jsx:1974
msgid "Metric change in value from `since` to `until`"
msgstr "从“Since”到“Until”值的量度变化"

#: superset/assets/src/explore/controls.jsx:1977
msgid "Percent Change"
msgstr "百分比变化"

#: superset/assets/src/explore/controls.jsx:1979
msgid "Metric percent change in value from `since` to `until`"
msgstr "度量值从“Since”到“Until”的值变化"

#: superset/assets/src/explore/controls.jsx:1982
msgid "Factor"
msgstr "因子"

#: superset/assets/src/explore/controls.jsx:1984
msgid "Metric factor change from `since` to `until`"
msgstr "从“Since”到“Until”的度量因子变化"

#: superset/assets/src/explore/controls.jsx:1987
#: superset/assets/src/explore/visTypes.js:71
msgid "Advanced Analytics"
msgstr "高级分析"

#: superset/assets/src/explore/controls.jsx:1989
msgid "Use the Advanced Analytics options below"
msgstr "使用下面的高级分析选项"

#: superset/assets/src/explore/controls.jsx:1994
msgid "Settings for time series"
msgstr "时间序列的设置"

#: superset/assets/src/explore/controls.jsx:1999
msgid "Equal Date Sizes"
msgstr "等时尺寸"

#: superset/assets/src/explore/controls.jsx:2002
msgid "Check to force date partitions to have the same height"
msgstr "检查强制日期分区是否具有相同的高度"

#: superset/assets/src/explore/controls.jsx:2007
msgid "Partition Limit"
msgstr "分区限制"

#: superset/assets/src/explore/controls.jsx:2011
msgid ""
"The maximum number of subdivisions of each group; lower values are pruned "
"first"
msgstr "每个组的最大分支数；较低的值首先修剪。"

#: superset/assets/src/explore/controls.jsx:2017
msgid "Minimum Radius"
msgstr "最小半径"

#: superset/assets/src/explore/controls.jsx:2023
msgid ""
"Minimum radius size of the circle, in pixels. As the zoom level changes, "
"this insures that the circle respects this minimum radius."
msgstr ""
"圆的最小半径大小，以像素为单位。随着缩放等级的变化，这保证了圆根据这个最小半"
"径变化。"

#: superset/assets/src/explore/controls.jsx:2029
msgid "Maximum Radius"
msgstr "最大半径"

#: superset/assets/src/explore/controls.jsx:2035
msgid ""
"Maxium radius size of the circle, in pixels. As the zoom level changes, this "
"insures that the circle respects this maximum radius."
msgstr ""
"圆的最大半径大小，以像素为单位。随着缩放等级的变化，这保证了圆根据这个最大半"
"径变化。"

#: superset/assets/src/explore/controls.jsx:2041
msgid "Partition Threshold"
msgstr "分割阈值"

#: superset/assets/src/explore/controls.jsx:2045
msgid ""
"Partitions whose height to parent height proportions are below this value "
"are pruned"
msgstr "将高度与父高度比例低的分区修剪掉"

#: superset/assets/src/explore/controls.jsx:2051
msgid "Lines column"
msgstr "线列"

#: superset/assets/src/explore/controls.jsx:2053
msgid "The database columns that contains lines information"
msgstr "包含行信息的数据库列"

#: superset/assets/src/explore/controls.jsx:2061
msgid "Lines encoding"
msgstr "线编码"

#: superset/assets/src/explore/controls.jsx:2064
msgid "The encoding format of the lines"
msgstr "线的编码格式"

#: superset/assets/src/explore/controls.jsx:2073
msgid "Line width"
msgstr "线宽"

#: superset/assets/src/explore/controls.jsx:2077
msgid "The width of the lines"
msgstr "线宽度"

#: superset/assets/src/explore/controls.jsx:2083
msgid "Line charts"
msgstr "线型图"

#: superset/assets/src/explore/controls.jsx:2086
msgid "Pick a set of line charts to layer on top of one another"
msgstr "选择一组可重叠的线型图"

#: superset/assets/src/explore/controls.jsx:2088
#: superset/assets/src/explore/controls.jsx:2106
#: superset/assets/src/explore/controls.jsx:2137
msgid "Select charts"
msgstr "选择图表"

#: superset/assets/src/explore/controls.jsx:2089
#: superset/assets/src/explore/controls.jsx:2107
#: superset/assets/src/explore/controls.jsx:2138
msgid "Error while fetching charts"
msgstr "获取图表时出错"

#: superset/assets/src/explore/controls.jsx:2101
msgid "Right Axis chart(s)"
msgstr "右轴图（S）"

#: superset/assets/src/explore/controls.jsx:2104
msgid "Choose one or more charts for right axis"
msgstr "为右轴选择一个或多个图表"

#: superset/assets/src/explore/controls.jsx:2118
msgid "Prefix metric name with slice name"
msgstr "前缀度量名"

#: superset/assets/src/explore/controls.jsx:2125
msgid "Reverse Lat & Long"
msgstr "反向经纬度"

#: superset/assets/src/explore/controls.jsx:2132
msgid "deck.gl charts"
msgstr "Deck.gl - 图表"

#: superset/assets/src/explore/controls.jsx:2135
msgid "Pick a set of deck.gl charts to layer on top of one another"
msgstr "选择一组deck.gl图表彼此层叠"

#: superset/assets/src/explore/controls.jsx:2148
msgid "Javascript data interceptor"
msgstr "JavaScript数据拦截器"

#: superset/assets/src/explore/controls.jsx:2149
msgid ""
"Define a javascript function that receives the data array used in the "
"visualization and is expected to return a modified version of that array. "
"This can be used to alter properties of the data, filter, or enrich the "
"array."
msgstr ""
"定义一个JavaScript函数，该函数接收可视化中使用的数组数据，并返回修改版本的数"
"组。这可用于更改数据、筛选或丰富数组的属性。"

#: superset/assets/src/explore/controls.jsx:2155
msgid "Javascript data mutator"
msgstr "JavaScript数据调制器"

#: superset/assets/src/explore/controls.jsx:2156
msgid ""
"Define a function that receives intercepts the data objects and can mutate it"
msgstr "定义一个接收截取数据对象并能对其进行变异的函数。"

#: superset/assets/src/explore/controls.jsx:2160
msgid "Javascript tooltip generator"
msgstr "JavaScript工具提示生成器"

#: superset/assets/src/explore/controls.jsx:2161
msgid ""
"Define a function that receives the input and outputs the content for a "
"tooltip"
msgstr "定义一个函数，接收输入输出工具提示的内容"

#: superset/assets/src/explore/controls.jsx:2165
msgid "Javascript onClick href"
msgstr "Javascript onClick事件触发转跳地址"

#: superset/assets/src/explore/controls.jsx:2166
msgid "Define a function that returns a URL to navigate to when user clicks"
msgstr "定义一个函数，当用户单击时返回导航URL"

#: superset/assets/src/explore/controls.jsx:2171
msgid "Extra data for JS"
msgstr "额外的JS数据"

#: superset/assets/src/explore/controls.jsx:2173
msgid "List of extra columns made available in Javascript functions"
msgstr "JavaScript函数中可用的额外列的列表"

#: superset/assets/src/explore/controls.jsx:2178
msgid "Stroked"
msgstr "已涂抹"

#: superset/assets/src/explore/controls.jsx:2180
msgid "Whether to display the stroke"
msgstr "是否显示笔划"

#: superset/assets/src/explore/controls.jsx:2186
msgid "Filled"
msgstr "填充"

#: superset/assets/src/explore/controls.jsx:2188
msgid "Whether to fill the objects"
msgstr "是否填充对象"

#: superset/assets/src/explore/controls.jsx:2194
msgid "Normalized"
msgstr "标准化"

#: superset/assets/src/explore/controls.jsx:2196
msgid "Whether to normalize the histogram"
msgstr "是否规范化直方图"

#: superset/assets/src/explore/validators.js:11
msgid "is expected to be a number"
msgstr "预计是一个数字"

#: superset/assets/src/explore/validators.js:18
msgid "is expected to be an integer"
msgstr "预计是整数"

#: superset/assets/src/explore/validators.js:30
msgid "cannot be empty"
msgstr "不能为空"

#: superset/assets/src/explore/visTypes.js:11
#: superset/assets/src/explore/visTypes.js:35
msgid "Time"
msgstr "时间"

#: superset/assets/src/explore/visTypes.js:13
#: superset/assets/src/explore/visTypes.js:36
msgid "Time related form attributes"
msgstr "时间相关的表单属性"

#: superset/assets/src/explore/visTypes.js:20
msgid "Datasource & Chart Type"
msgstr "数据源 & 图表类型"

#: superset/assets/src/explore/visTypes.js:49
msgid "This section exposes ways to include snippets of SQL in your query"
msgstr "本节公开了在查询中包含SQL片段的方法"

#: superset/assets/src/explore/visTypes.js:52
msgid "Annotations and Layers"
msgstr "注释与注释层"

#: superset/assets/src/explore/components/DisplayQueryButton.jsx:126
#: superset/assets/src/explore/visTypes.js:60
#: superset/assets/src/explore/visTypes.js:114
#: superset/assets/src/explore/visTypes.js:161
#: superset/assets/src/explore/visTypes.js:310
#: superset/assets/src/explore/visTypes.js:500
#: superset/assets/src/explore/visTypes.js:538
#: superset/assets/src/explore/visTypes.js:577
#: superset/assets/src/explore/visTypes.js:610
#: superset/assets/src/explore/visTypes.js:655
#: superset/assets/src/explore/visTypes.js:694
#: superset/assets/src/explore/visTypes.js:734
#: superset/assets/src/explore/visTypes.js:783
#: superset/assets/src/explore/visTypes.js:929
#: superset/assets/src/explore/visTypes.js:969
#: superset/assets/src/explore/visTypes.js:1017
#: superset/assets/src/explore/visTypes.js:1039
#: superset/assets/src/explore/visTypes.js:1068
#: superset/assets/src/explore/visTypes.js:1105
#: superset/assets/src/explore/visTypes.js:1127
#: superset/assets/src/explore/visTypes.js:1178
#: superset/assets/src/explore/visTypes.js:1201
#: superset/assets/src/explore/visTypes.js:1228
#: superset/assets/src/explore/visTypes.js:1255
#: superset/assets/src/explore/visTypes.js:1297
#: superset/assets/src/explore/visTypes.js:1336
#: superset/assets/src/explore/visTypes.js:1364
#: superset/assets/src/explore/visTypes.js:1391
#: superset/assets/src/explore/visTypes.js:1430
#: superset/assets/src/explore/visTypes.js:1464
#: superset/assets/src/explore/visTypes.js:1501
#: superset/assets/src/explore/visTypes.js:1541
#: superset/assets/src/explore/visTypes.js:1563
#: superset/assets/src/explore/visTypes.js:1624
msgid "Query"
msgstr "查询"

#: superset/assets/src/explore/visTypes.js:72
msgid ""
"This section contains options that allow for advanced analytical post "
"processing of query results"
msgstr "本节包含允许对查询结果进行高级分析处理后的选项。"

#: superset/assets/src/explore/visTypes.js:90
msgid "Result Filters"
msgstr "结果筛选"

#: superset/assets/src/explore/visTypes.js:92
msgid ""
"The filters to apply after post-aggregation.Leave the value control empty to "
"filter empty strings or nulls"
msgstr "过滤器应用在聚合后。将Valk控件留空，以过滤空字符串或空值。"

#: superset/assets/src/explore/visTypes.js:126
#: superset/assets/src/explore/visTypes.js:171
#: superset/assets/src/explore/visTypes.js:190
#: superset/assets/src/explore/visTypes.js:234
#: superset/assets/src/explore/visTypes.js:317
#: superset/assets/src/explore/visTypes.js:355
#: superset/assets/src/explore/visTypes.js:400
#: superset/assets/src/explore/visTypes.js:445
#: superset/assets/src/explore/visTypes.js:840
#: superset/assets/src/explore/visTypes.js:1047
#: superset/assets/src/explore/visTypes.js:1076
#: superset/assets/src/explore/visTypes.js:1113
#: superset/assets/src/explore/visTypes.js:1137
#: superset/assets/src/explore/visTypes.js:1185
#: superset/assets/src/explore/visTypes.js:1209
#: superset/assets/src/explore/visTypes.js:1236
#: superset/assets/src/explore/visTypes.js:1264
#: superset/assets/src/explore/visTypes.js:1306
#: superset/assets/src/explore/visTypes.js:1345
#: superset/assets/src/explore/visTypes.js:1399
#: superset/assets/src/explore/visTypes.js:1611
#: superset/assets/src/explore/visTypes.js:1760
#: superset/assets/src/explore/visTypes.js:1785
msgid "Chart Options"
msgstr "图表选项"

#: superset/assets/src/explore/visTypes.js:150
msgid "Breakdowns"
msgstr "分解"

#: superset/assets/src/explore/visTypes.js:151
msgid "Defines how each series is broken down"
msgstr "定义每个序列是如何被分解的"

#: superset/assets/src/explore/visTypes.js:157
msgid "Pie Chart"
msgstr "饼图"

#: superset/assets/src/explore/visTypes.js:253
#: superset/assets/src/explore/visTypes.js:363
msgid "Y Axis 1"
msgstr "Y轴1"

#: superset/assets/src/explore/visTypes.js:260
#: superset/assets/src/explore/visTypes.js:370
msgid "Y Axis 2"
msgstr "Y轴2"

#: superset/assets/src/explore/visTypes.js:270
msgid "Left Axis chart(s)"
msgstr "左轴图表"

#: superset/assets/src/explore/visTypes.js:271
msgid "Choose one or more charts for left axis"
msgstr "为左轴选择一个或多个图表"

#: superset/assets/src/explore/visTypes.js:274
#: superset/assets/src/explore/visTypes.js:384
msgid "Left Axis Format"
msgstr "左轴格式"

#: superset/assets/src/explore/visTypes.js:305
msgid "Time Series - Periodicity Pivot"
msgstr "时间序列-周期透视表"

#: superset/assets/src/explore/visTypes.js:351
msgid "Dual Axis Line Chart"
msgstr "双轴线形图"

#: superset/assets/src/explore/visTypes.js:380
msgid "Left Axis Metric"
msgstr "左轴计量指标"

#: superset/assets/src/explore/visTypes.js:381
msgid "Choose a metric for left axis"
msgstr "选择左轴的计量指标"

#: superset/assets/src/explore/visTypes.js:485
#: superset/assets/src/explore/visTypes.js:508
#: superset/assets/src/explore/visTypes.js:546
#: superset/assets/src/explore/visTypes.js:585
#: superset/assets/src/explore/visTypes.js:618
#: superset/assets/src/explore/visTypes.js:662
#: superset/assets/src/explore/visTypes.js:702
#: superset/assets/src/explore/visTypes.js:742
#: superset/assets/src/explore/visTypes.js:790
msgid "Map"
msgstr "地图"

#: superset/assets/src/explore/visTypes.js:496
msgid "Deck.gl - Hexagons"
msgstr "Deck.gl - 六边形"

#: superset/assets/src/explore/visTypes.js:516
#: superset/assets/src/explore/visTypes.js:554
#: superset/assets/src/explore/visTypes.js:594
#: superset/assets/src/explore/visTypes.js:631
#: superset/assets/src/explore/visTypes.js:678
#: superset/assets/src/explore/visTypes.js:718
#: superset/assets/src/explore/visTypes.js:756
#: superset/assets/src/explore/visTypes.js:813
msgid "Advanced"
msgstr "高级"

#: superset/assets/src/explore/components/EmbedCodeButton.jsx:77
#: superset/assets/src/explore/visTypes.js:527
#: superset/assets/src/explore/visTypes.js:565
msgid "Height"
msgstr "高度"

#: superset/assets/src/explore/visTypes.js:528
#: superset/assets/src/explore/visTypes.js:566
msgid "Metric used to control height"
msgstr "用于控制高度的计量指标"

#: superset/assets/src/explore/visTypes.js:534
msgid "Deck.gl - Grid"
msgstr "Deck.gl - 三维网格"

#: superset/assets/src/explore/visTypes.js:606
msgid "Deck.gl - Screen grid"
msgstr "Deck.gl - 屏幕网格"

#: superset/assets/src/explore/visTypes.js:625
msgid "Grid"
msgstr "网格"

#: superset/assets/src/explore/visTypes.js:642
msgid "Weight"
msgstr "重量"

#: superset/assets/src/explore/visTypes.js:643
msgid "Metric used as a weight for the grid's coloring"
msgstr "计量指标用作网格着色的权重"

#: superset/assets/src/explore/visTypes.js:651
msgid "Deck.gl - GeoJson"
msgstr "Deck.gl - Geo地理"

#: superset/assets/src/explore/visTypes.js:669
msgid "GeoJson Settings"
msgstr "GeoJson设置"

#: superset/assets/src/explore/visTypes.js:709
msgid "Polygon Settings"
msgstr "Polygon设置"

#: superset/assets/src/explore/visTypes.js:749
msgid "Arc"
msgstr "弧"

#: superset/assets/src/explore/visTypes.js:806
msgid "Point Color"
msgstr "点颜色"

#: superset/assets/src/explore/visTypes.js:824
msgid "Categorical Color"
msgstr "分类颜色"

#: superset/assets/src/explore/visTypes.js:825
msgid "Pick a dimension from which categorical colors are defined"
msgstr "选择定义分类颜色的维度"

#: superset/assets/src/explore/visTypes.js:884
msgid "GROUP BY"
msgstr "分组"

#: superset/assets/src/explore/visTypes.js:885
msgid "Use this section if you want a query that aggregates"
msgstr "如果需要聚合的查询，请使用此部分"

#: superset/assets/src/explore/visTypes.js:896
msgid "NOT GROUPED BY"
msgstr "排除分组"

#: superset/assets/src/explore/visTypes.js:897
msgid "Use this section if you want to query atomic rows"
msgstr "如果要查询原子行，请使用此部分"

#: superset/assets/src/explore/visTypes.js:926
msgid "Time Series Table"
msgstr "时间序列表"

#: superset/assets/src/explore/visTypes.js:944
msgid ""
"Templated link, it's possible to include {{ metric }} or other values coming "
"from the controls."
msgstr "模板链接，可以包含{{度量}}或来自控件的其他值。"

#: superset/assets/src/explore/visTypes.js:978
msgid "Pivot Options"
msgstr "透视表选项"

#: superset/assets/src/explore/visTypes.js:1090
msgid "Number Format"
msgstr "数字格式"

#: superset/assets/src/explore/visTypes.js:1093
msgid "Time Format"
msgstr "时间格式"

#: superset/assets/src/explore/visTypes.js:1277
msgid "Numeric Columns"
msgstr "数字列"

#: superset/assets/src/explore/visTypes.js:1278
msgid "Select the numeric columns to draw the histogram"
msgstr "选择要绘制直方图的数字列"

#: superset/assets/src/explore/visTypes.js:1282
msgid "No of Bins"
msgstr "没有直方图"

#: superset/assets/src/explore/visTypes.js:1283
msgid "Select number of bins for the histogram"
msgstr "选择直方图的容器数"

#: superset/assets/src/explore/visTypes.js:1287
msgid "Opacity of the bars. Between 0 and 1"
msgstr "所有簇、点和标签的不透明度。在0到1之间"

#: superset/assets/src/explore/visTypes.js:1315
msgid "Primary Metric"
msgstr "主计量指标"

#: superset/assets/src/explore/visTypes.js:1316
msgid "The primary metric is used to define the arc segment sizes"
msgstr "主计量指标用于定义弧段大小。"

#: superset/assets/src/explore/visTypes.js:1319
msgid "Secondary Metric"
msgstr "次计量指标"

#: superset/assets/src/explore/visTypes.js:1321
msgid ""
"[optional] this secondary metric is used to define the color as a ratio "
"against the primary metric. When omitted, the color is categorical and based "
"on labels"
msgstr ""
"次计量指标用来定义颜色与主度量的比率。如果两个度量匹配，则将颜色映射到级别组"

#: superset/assets/src/explore/visTypes.js:1326
msgid "Hierarchy"
msgstr "层级"

#: superset/assets/src/explore/visTypes.js:1327
msgid "This defines the level of the hierarchy"
msgstr "这定义了层次级别"

#: superset/assets/src/explore/visTypes.js:1354
#: superset/assets/src/explore/visTypes.js:1382
msgid "Source / Target"
msgstr "源/目标"

#: superset/assets/src/explore/visTypes.js:1355
#: superset/assets/src/explore/visTypes.js:1383
msgid "Choose a source and a target"
msgstr "选择一个源和一个目标"

#: superset/assets/src/explore/visTypes.js:1388
msgid "Chord Diagram"
msgstr "弦图"

#: superset/assets/src/explore/visTypes.js:1410
msgid "Choose a number format"
msgstr "选择一个数字格式"

#: superset/assets/src/explore/visTypes.js:1413
msgid "Source"
msgstr "来源"

#: superset/assets/src/explore/visTypes.js:1416
msgid "Choose a source"
msgstr "选择一个源"

#: superset/assets/src/explore/visTypes.js:1419
msgid "Target"
msgstr "目标"

#: superset/assets/src/explore/visTypes.js:1422
msgid "Choose a target"
msgstr "选择一个目标"

#: superset/assets/src/explore/visTypes.js:1448
msgid "ISO 3166-2 codes of region/province/department"
msgstr "地区/省/部门ISO3166-2代码"

#: superset/assets/src/explore/visTypes.js:1449
msgid ""
"It's ISO 3166-2 of your region/province/department in your table. (see "
"documentation for list of ISO 3166-2)"
msgstr ""
"它是数据表中您的地区/省/部门ISO 3166-2代码。（参见ISO 3166-2列表的文档）"

#: superset/assets/src/explore/visTypes.js:1473
msgid "Bubbles"
msgstr "气泡"

#: superset/assets/src/explore/visTypes.js:1483
msgid "Country Control"
msgstr "国家控制"

#: superset/assets/src/explore/visTypes.js:1484
msgid "3 letter code of the country"
msgstr "国家3字母代码"

#: superset/assets/src/explore/visTypes.js:1487
msgid "Metric for color"
msgstr "度量颜色"

#: superset/assets/src/explore/visTypes.js:1488
msgid "Metric that defines the color of the country"
msgstr "定义国家度量的颜色"

#: superset/assets/src/explore/visTypes.js:1491
msgid "Bubble size"
msgstr "气泡尺寸"

#: superset/assets/src/explore/visTypes.js:1492
msgid "Metric that defines the size of the bubble"
msgstr "定义度量的气泡大小"

#: superset/assets/src/explore/visTypes.js:1498
msgid "Filter Box"
msgstr "筛选盒"

#: superset/assets/src/explore/visTypes.js:1514
msgid "Filter controls"
msgstr "筛选控件"

#: superset/assets/src/explore/visTypes.js:1515
msgid ""
"The controls you want to filter on. Note that only columns checked as "
"\"filterable\" will show up on this list."
msgstr "要筛选的控件。注意，只有列为设置为“可过滤”才会显示在该列表上。"

#: superset/assets/src/explore/visTypes.js:1571
msgid "Heatmap Options"
msgstr "热力图选项"

#: superset/assets/src/explore/visTypes.js:1592
msgid "Whether to apply a normal distribution based on rank on the color scale"
msgstr "在色标上是否应用基于排列的正态分布"

#: superset/assets/src/explore/visTypes.js:1594
msgid "Value bounds"
msgstr "值边界"

#: superset/assets/src/explore/visTypes.js:1596
msgid ""
"Hard value bounds applied for color coding. Is only relevant and applied "
"when the normalization is applied against the whole heatmap."
msgstr ""
"应用于颜色编码的硬值边界。只有当对整个热图应用标准化时才是相关的和应用的。"

#: superset/assets/src/explore/visTypes.js:1601
msgid "Value Format"
msgstr "值格式"

#: superset/assets/src/explore/visTypes.js:1607
msgid "Horizon"
msgstr "地平线"

#: superset/assets/src/explore/visTypes.js:1634
msgid "Points"
msgstr "积分"

#: superset/assets/src/explore/visTypes.js:1641
msgid "Labelling"
msgstr "贴标签"

#: superset/assets/src/explore/visTypes.js:1648
msgid "Visual Tweaks"
msgstr "视觉调整"

#: superset/assets/src/explore/visTypes.js:1667
msgid "Column containing longitude data"
msgstr "包含经度数据的列"

#: superset/assets/src/explore/visTypes.js:1671
msgid "Column containing latitude data"
msgstr "包含纬度数据的列"

#: superset/assets/src/explore/visTypes.js:1674
msgid "Cluster label aggregator"
msgstr "集群标签聚合器"

#: superset/assets/src/explore/visTypes.js:1675
msgid ""
"Aggregate function applied to the list of points in each cluster to produce "
"the cluster label."
msgstr "聚合函数应用于每个群集中的点列表以产生群集标签。"

#: superset/assets/src/explore/visTypes.js:1679
msgid "Tooltip"
msgstr "提示"

#: superset/assets/src/explore/visTypes.js:1680
msgid ""
"Show a tooltip when hovering over points and clusters describing the label"
msgstr "鼠标悬停在描述标签的点和簇上时，可以显示对应的提示"

#: superset/assets/src/explore/visTypes.js:1684
msgid ""
"One or many controls to group by. If grouping, latitude and longitude "
"columns must be present."
msgstr "使用一个或多个控件来分组。一旦分组，则纬度和经度列必须存在。"

#: superset/assets/src/explore/visTypes.js:1695
msgid "Event definition"
msgstr "事件定义"

#: superset/assets/src/explore/visTypes.js:1705
msgid "Additional meta data"
msgstr "额外的元数据"

#: superset/assets/src/explore/visTypes.js:1713
msgid "Column containing entity ids"
msgstr "包含实体标识的列"

#: superset/assets/src/explore/visTypes.js:1714
msgid "e.g., a \"user id\" column"
msgstr "包含事件名称的列"

#: superset/assets/src/explore/visTypes.js:1717
msgid "Column containing event names"
msgstr "包含事件名称的列"

#: superset/assets/src/explore/visTypes.js:1725
msgid "Event count limit"
msgstr "事件计数限制"

#: superset/assets/src/explore/visTypes.js:1726
msgid "The maximum number of events to return, equivalent to number of rows"
msgstr "要返回的最大事件数量，相当于行数"

#: superset/assets/src/explore/visTypes.js:1729
msgid "Meta data"
msgstr "元数据"

#: superset/assets/src/explore/visTypes.js:1730
msgid "Select any columns for meta data inspection"
msgstr "选择任何列用来对元数据进行探查"

#: superset/assets/src/explore/visTypes.js:1742
msgid "Paired t-test"
msgstr "配对t-检验"

#: superset/assets/src/explore/visTypes.js:1778
msgid "Time Series Options"
msgstr "时序图选项"

#: superset/assets/src/explore/components/AdhocFilterEditPopoverSimpleTabContent.jsx:212
msgid "No such column found. To filter on a metric, try the Custom SQL tab."
msgstr "没有发现这样的列。若要在度量值上筛选，请尝试自定义SQL选项卡。"

#: superset/assets/src/explore/components/AdhocFilterEditPopoverSimpleTabContent.jsx:218
#, python-format
msgid "%s column(s) and metric(s)"
msgstr "%s 列与计量指标"

#: superset/assets/src/explore/components/AdhocFilterEditPopoverSimpleTabContent.jsx:228
#: superset/assets/src/explore/components/AdhocMetricEditPopover.jsx:166
#, python-format
msgid "%s column(s)"
msgstr "%s列表"

#: superset/assets/src/explore/components/AdhocFilterEditPopoverSimpleTabContent.jsx:229
msgid "To filter on a metric, use Custom SQL tab."
msgstr "若要在计量值上筛选，请使用自定义SQL选项卡。"

#: superset/assets/src/explore/components/AdhocFilterEditPopoverSimpleTabContent.jsx:235
#, python-format
msgid "%s operators(s)"
msgstr "%s 运算符"

#: superset/assets/src/explore/components/AdhocFilterEditPopoverSimpleTabContent.jsx:275
msgid "type a value here"
msgstr "在这里键入一个值"

#: superset/assets/src/explore/components/AdhocFilterEditPopoverSimpleTabContent.jsx:284
#: superset/assets/src/explore/components/controls/Filter.jsx:120
msgid "Filter value"
msgstr "过滤值"

#: superset/assets/src/explore/components/AdhocFilterEditPopoverSqlTabContent.jsx:91
msgid "choose WHERE or HAVING..."
msgstr "选择WHERE或HAVING子句..."

#: superset/assets/src/explore/components/AdhocMetricEditPopover.jsx:179
#, python-format
msgid "%s aggregates(s)"
msgstr "%s 聚合"

#: superset/assets/src/explore/components/ControlHeader.jsx:35
msgid "description"
msgstr "描述"

#: superset/assets/src/explore/components/ControlHeader.jsx:46
msgid "bolt"
msgstr "螺栓"

#: superset/assets/src/explore/components/ControlHeader.jsx:47
msgid "Changing this control takes effect instantly"
msgstr "更改此控件立即生效。"

#: superset/assets/src/explore/components/DisplayQueryButton.jsx:75
msgid "Error..."
msgstr "错误 ..."

#: superset/assets/src/explore/components/EmbedCodeButton.jsx:91
msgid "Width"
msgstr "宽度"

#: superset/assets/src/explore/components/ExploreActionButtons.jsx:42
msgid "Export to .json"
msgstr "导出到 .json"

#: superset/assets/src/explore/components/ExploreActionButtons.jsx:52
msgid "Export to .csv format"
msgstr "导出为 .csv 格式"

#: superset/assets/src/explore/components/ExploreChartHeader.jsx:64
#, python-format
msgid "%s - untitled"
msgstr "%s  - 无标题"

#: superset/assets/src/explore/components/ExploreChartHeader.jsx:100
msgid "Edit chart properties"
msgstr "编辑图表属性"

#: superset/assets/src/explore/components/RowCountLabel.jsx:25
msgid "Limit reached"
msgstr "达到限制"

#: superset/assets/src/explore/components/SaveModal.jsx:74
msgid "Please enter a chart name"
msgstr "请输入图表名称"

#: superset/assets/src/explore/components/SaveModal.jsx:89
msgid "Please select a dashboard"
msgstr "请选择一个仪表板"

#: superset/assets/src/explore/components/SaveModal.jsx:97
msgid "Please enter a dashboard name"
msgstr "请输入仪表板名称"

#: superset/assets/src/explore/components/SaveModal.jsx:133
msgid "Save A Chart"
msgstr "图表保存"

#: superset/assets/src/explore/components/SaveModal.jsx:154
#, python-format
msgid "Overwrite chart %s"
msgstr "覆盖图表 %s"

#: superset/assets/src/explore/components/SaveModal.jsx:167
msgid "[chart name]"
msgstr "[图表名称]"

#: superset/assets/src/explore/components/SaveModal.jsx:180
msgid "Do not add to a dashboard"
msgstr "不要添加到仪表板"

#: superset/assets/src/explore/components/SaveModal.jsx:188
msgid "Add chart to existing dashboard"
msgstr "将图表添加到现有仪表盘"

#: superset/assets/src/explore/components/SaveModal.jsx:204
msgid "Add to new dashboard"
msgstr "添加到新的仪表板"

#: superset/assets/src/explore/components/SaveModal.jsx:230
msgid "Save & go to dashboard"
msgstr "保存并转到仪表板"

#: superset/assets/src/explore/components/controls/AdhocFilterControl.jsx:241
msgid "choose a column or metric"
msgstr "选择列或计量指标"

#: superset/assets/src/explore/components/controls/AnnotationLayerControl.jsx:147
msgid "Add Annotation Layer"
msgstr "添加注释层"

#: superset/assets/src/explore/components/controls/BoundsControl.jsx:50
msgid "`Min` value should be numeric or empty"
msgstr "最小值应该是数字或空的"

#: superset/assets/src/explore/components/controls/BoundsControl.jsx:53
msgid "`Max` value should be numeric or empty"
msgstr "最大值应该是数字或空的"

#: superset/assets/src/explore/components/controls/BoundsControl.jsx:70
#: superset/connectors/druid/views.py:57
msgid "Min"
msgstr "最小值"

#: superset/assets/src/explore/components/controls/BoundsControl.jsx:78
#: superset/connectors/druid/views.py:58
msgid "Max"
msgstr "最大值"

#: superset/assets/src/explore/components/controls/DatasourceControl.jsx:79
msgid "Something went wrong while fetching the datasource list"
msgstr "提取数据源列表时出错"

#: superset/assets/src/explore/components/controls/DatasourceControl.jsx:110
msgid "Select a datasource"
msgstr "选择一个数据源"

#: superset/assets/src/explore/components/controls/DatasourceControl.jsx:120
#: superset/assets/src/explore/components/controls/VizTypeControl.jsx:120
msgid "Search / Filter"
msgstr "搜索 / 过滤"

#: superset/assets/src/explore/components/controls/DatasourceControl.jsx:180
msgid "Click to point to another datasource"
msgstr "点击指向另一个数据源"

#: superset/assets/src/explore/components/controls/DatasourceControl.jsx:191
msgid "Edit the datasource's configuration"
msgstr "编辑数据源的配置"

#: superset/assets/src/explore/components/controls/DatasourceControl.jsx:203
msgid "Show datasource configuration"
msgstr "显示数据源配置"

#: superset/assets/src/explore/components/controls/Filter.jsx:149
msgid "Select metric"
msgstr "选择指标"

#: superset/assets/src/explore/components/controls/Filter.jsx:149
msgid "Select column"
msgstr "选择列"

#: superset/assets/src/explore/components/controls/Filter.jsx:161
msgid "Select operator"
msgstr "选择运算符"

#: superset/templates/appbuilder/general/widgets/search.html:6
msgid "Add Filter"
msgstr "增加过滤条件"

#: superset/assets/src/explore/components/controls/MetricsControl.jsx:239
msgid "choose a column or aggregate function"
msgstr "选择一个字段或聚合函数"

#: superset/assets/src/explore/components/controls/SelectAsyncControl.jsx:25
msgid "Error while fetching data"
msgstr "获取数据时出错"

#: superset/assets/src/explore/components/controls/SelectControl.jsx:48
msgid "No results found"
msgstr "未找到结果"

#: superset/assets/src/explore/components/controls/SelectControl.jsx:114
#, python-format
msgid "%s option(s)"
msgstr "%s 选项"

#: superset/assets/src/explore/components/controls/SpatialControl.jsx:62
msgid "Invalid lat/long configuration."
msgstr "错误的经纬度配置。"

#: superset/assets/src/explore/components/controls/SpatialControl.jsx:128
msgid "Longitude & Latitude columns"
msgstr "经纬度字段"

#: superset/assets/src/explore/components/controls/SpatialControl.jsx:144
msgid "Delimited long & lat single column"
msgstr "经度&纬度单列限定"

#: superset/assets/src/explore/components/controls/SpatialControl.jsx:145
msgid ""
"Multiple formats accepted, look the geopy.points Python library for more "
"details"
msgstr "接受多种格式，查看geopy.points库以获取更多细节"

#: superset/assets/src/explore/components/controls/SpatialControl.jsx:157
msgid "Reverse lat/long "
msgstr "经纬度互换"

#: superset/assets/src/explore/components/controls/SpatialControl.jsx:163
msgid "Geohash"
msgstr "Geo哈希"

#: superset/assets/src/explore/components/controls/TextAreaControl.jsx:70
msgid "textarea"
msgstr "文本区域"

#: superset/assets/src/explore/components/controls/TextAreaControl.jsx:98
msgid "Edit"
msgstr "编辑"

#: superset/assets/src/explore/components/controls/TextAreaControl.jsx:98
msgid "in modal"
msgstr "在模态中"

#: superset/assets/src/explore/components/controls/VizTypeControl.jsx:110
msgid "Select a visualization type"
msgstr "选择一个可视化类型"

#: superset/assets/src/profile/components/App.jsx:24
#: superset/assets/src/welcome/App.jsx:56
#: superset/assets/src/welcome/App.jsx:59
msgid "Favorites"
msgstr "收藏"

#: superset/assets/src/profile/components/App.jsx:30
msgid "Created Content"
msgstr "创建内容"

#: superset/assets/src/profile/components/App.jsx:37
msgid "Recent Activity"
msgstr "近期活动"

#: superset/assets/src/profile/components/App.jsx:42
msgid "Security & Access"
msgstr "安全 & 访问"

#: superset/assets/src/profile/components/CreatedContent.jsx:33
msgid "No charts"
msgstr "没有图表"

#: superset/assets/src/profile/components/CreatedContent.jsx:49
msgid "No dashboards"
msgstr "没有看板"

#: superset/assets/src/profile/components/CreatedContent.jsx:58
#: superset/assets/src/profile/components/Favorites.jsx:59
#: superset/assets/src/welcome/App.jsx:28
#: superset/assets/src/welcome/App.jsx:31 superset/views/core.py:459
#: superset/views/core.py:628
msgid "Dashboards"
msgstr "看板"

#: superset/assets/src/profile/components/CreatedContent.jsx:61
#: superset/assets/src/profile/components/Favorites.jsx:62
#: superset/views/core.py:500 superset/views/core.py:573
msgid "Charts"
msgstr "图表"

#: superset/assets/src/profile/components/Favorites.jsx:34
msgid "No favorite charts yet, go click on stars!"
msgstr "暂无收藏的图表，去点击星星吧！"

#: superset/assets/src/profile/components/Favorites.jsx:50
msgid "No favorite dashboards yet, go click on stars!"
msgstr "暂无收藏的看板，去点击星星吧！"

#: superset/assets/src/profile/components/Security.jsx:14
msgid "Roles"
msgstr "角色"

#: superset/assets/src/profile/components/Security.jsx:23
#: superset/views/core.py:313
msgid "Databases"
msgstr "数据库"

#: superset/assets/src/profile/components/Security.jsx:34
msgid "Datasources"
msgstr "数据源"

#: superset/assets/src/profile/components/UserInfo.jsx:19
msgid "Profile picture provided by Gravatar"
msgstr "资料图片由 Gravatar 提供"

#: superset/assets/src/profile/components/UserInfo.jsx:34
msgid "joined"
msgstr "joined"

#: superset/assets/src/profile/components/UserInfo.jsx:44
msgid "id:"
msgstr "id:"

#: superset/assets/src/visualizations/EventFlow.jsx:56
msgid "Sorry, there appears to be no data"
msgstr "对不起，似乎没有数据"

#: superset/assets/src/visualizations/PlaySlider.jsx:99
msgid "Data has no time steps"
msgstr "数据没有时间步长"

#: superset/assets/src/visualizations/filter_box.jsx:115
msgid "Select starting date"
msgstr "选择开始时间"

#: superset/assets/src/visualizations/filter_box.jsx:124
msgid "Select end date"
msgstr "选择结束日期"

#: superset/assets/src/visualizations/filter_box.jsx:193
#, python-format
msgid "Select [%s]"
msgstr "选择 [%s]"

#: superset/assets/src/visualizations/filter_box.jsx:230
msgid "Apply"
msgstr "应用"

#: superset/assets/src/visualizations/nvd3_vis.js:172
msgid "You cannot use 45° tick layout along with the time range filter"
msgstr "您不能使用45°嘀嗒布局以及时间范围过滤器"

#: superset/assets/src/welcome/App.jsx:47
#: superset/assets/src/welcome/App.jsx:50
msgid "Recently Viewed"
msgstr "最近浏览"

#: superset/connectors/druid/models.py:1038
msgid "Metric(s) {} must be aggregations."
msgstr "度量(s) {} 必须是聚合。"

#: superset/connectors/druid/models.py:1360
msgid "No data was returned."
msgstr "没有返回任何数据。"

#: superset/connectors/druid/models.py:1419
msgid "Unsupported extraction function: "
msgstr "不支持的提取函数："

#: superset/connectors/druid/views.py:33
msgid "List Druid Column"
msgstr "Druid 列的列表"

#: superset/connectors/druid/views.py:34
msgid "Show Druid Column"
msgstr "显示 Druid 列"

#: superset/connectors/druid/views.py:35
msgid "Add Druid Column"
msgstr "添加 Druid 列"

#: superset/connectors/druid/views.py:36
msgid "Edit Druid Column"
msgstr "编辑 Druid 列"

#: superset/connectors/druid/views.py:50 superset/connectors/sqla/views.py:83
msgid "Column"
msgstr "列"

#: superset/connectors/druid/views.py:51 superset/connectors/druid/views.py:136
#: superset/connectors/sqla/views.py:93 superset/connectors/sqla/views.py:134
msgid "Type"
msgstr "类型"

#: superset/connectors/druid/views.py:53 superset/connectors/sqla/views.py:86
msgid "Groupable"
msgstr "可分组"

#: superset/connectors/druid/views.py:54 superset/connectors/sqla/views.py:87
msgid "Filterable"
msgstr "可过滤"

#: superset/connectors/druid/views.py:55
msgid "Count Distinct"
msgstr "计数"

#: superset/connectors/druid/views.py:56
msgid "Sum"
msgstr "求和"

#: superset/connectors/druid/views.py:61 superset/connectors/sqla/views.py:52
msgid ""
"Whether this column is exposed in the `Filters` section of the explore view."
msgstr "该列是否在浏览视图的`过滤器`部分显示。"

#: superset/connectors/druid/views.py:107
msgid "List Druid Metric"
msgstr "Druid 指标列表"

#: superset/connectors/druid/views.py:108
msgid "Show Druid Metric"
msgstr "显示 Druid 指标"

#: superset/connectors/druid/views.py:109
msgid "Add Druid Metric"
msgstr "添加 Druid 指标"

#: superset/connectors/druid/views.py:110
msgid "Edit Druid Metric"
msgstr "编辑 Druid 指标"

#: superset/connectors/druid/views.py:127 superset/connectors/sqla/views.py:116
msgid ""
"Whether the access to this metric is restricted to certain roles. Only roles "
"with the permission 'metric access on XXX (the name of this metric)' are "
"allowed to access this metric"
msgstr "是否访问受限。只有有权限的用户才能访问"

#: superset/connectors/druid/views.py:135 superset/connectors/sqla/views.py:84
#: superset/connectors/sqla/views.py:133
msgid "Verbose Name"
msgstr "全称"

#: superset/connectors/druid/views.py:137 superset/views/core.py:670
msgid "JSON"
msgstr "JSON"

#: superset/connectors/druid/views.py:138
msgid "Druid Datasource"
msgstr "Druid 数据源"

#: superset/connectors/druid/views.py:139 superset/connectors/sqla/views.py:139
msgid "Warning Message"
msgstr "告警信息"

#: superset/connectors/druid/views.py:157
msgid "List Druid Cluster"
msgstr "Druid 集群列表"

#: superset/connectors/druid/views.py:158
msgid "Show Druid Cluster"
msgstr "显示 Druid 集群"

#: superset/connectors/druid/views.py:159
msgid "Add Druid Cluster"
msgstr "添加 Druid 集群"

#: superset/connectors/druid/views.py:160
msgid "Edit Druid Cluster"
msgstr "编辑 Druid 集群"

#: superset/connectors/druid/views.py:171
#: superset/connectors/druid/views.py:257
msgid "Cluster"
msgstr "集群"

#: superset/connectors/druid/views.py:175
msgid "Broker Host"
msgstr "代理主机"

#: superset/connectors/druid/views.py:176
msgid "Broker Port"
msgstr "代理端口"

#: superset/connectors/druid/views.py:177
msgid "Broker Endpoint"
msgstr "代理端点"

#: superset/connectors/druid/views.py:193
msgid "Druid Clusters"
msgstr "Druid 集群"

#: superset/connectors/druid/views.py:196
#: superset/connectors/druid/views.py:298
#: superset/connectors/druid/views.py:347
#: superset/connectors/druid/views.py:355 superset/connectors/sqla/views.py:315
#: superset/views/core.py:316 superset/views/core.py:2771
msgid "Sources"
msgstr "数据源"

#: superset/connectors/druid/views.py:204
msgid "List Druid Datasource"
msgstr "Druid 数据源列表"

#: superset/connectors/druid/views.py:205
msgid "Show Druid Datasource"
msgstr "显示 Druid 数据源"

#: superset/connectors/druid/views.py:206
msgid "Add Druid Datasource"
msgstr "添加 Druid 数据源"

#: superset/connectors/druid/views.py:207
msgid "Edit Druid Datasource"
msgstr "编辑 Druid 数据源"

#: superset/connectors/druid/views.py:226 superset/connectors/sqla/views.py:182
msgid ""
"The list of charts associated with this table. By altering this datasource, "
"you may change how these associated charts behave. Also note that charts "
"need to point to a datasource, so this form will fail at saving if removing "
"charts from a datasource. If you want to change the datasource for a chart, "
"overwrite the chart from the 'explore view'"
msgstr ""
"与此表关联的图表列表。通过更改此数据源，您可以更改这些相关图表的行为。还要注"
"意，图表需要指向数据源，如果从数据源中删除图表，则此窗体将无法保存。如果要为"
"图表更改数据源，请从“浏览视图”更改该图表。"

#: superset/connectors/druid/views.py:234 superset/connectors/sqla/views.py:190
msgid "Timezone offset (in hours) for this datasource"
msgstr "数据源的时差(单位：小时)"

#: superset/connectors/druid/views.py:238
msgid ""
"Time expression to use as a predicate when retrieving distinct values to "
"populate the filter component. Only applies when `Enable Filter Select` is "
"on. If you enter `7 days ago`, the distinct list of values in the filter "
"will be populated based on the distinct value over the past week"
msgstr ""
"当检索不同的值以填充过滤器组件时，时间表达式用作条件。只适用于`启用过滤器选择"
"`。如果您输入`7天前`，将根据过去一周的不同值来填充ilter中不同的值列表"

#: superset/connectors/druid/views.py:245 superset/connectors/sqla/views.py:212
msgid ""
"Whether to populate the filter's dropdown in the explore view's filter "
"section with a list of distinct values fetched from the backend on the fly"
msgstr ""
"是否在浏览视图的过滤器部分中填充过滤器的下拉列表，并提供从后端获取的不同值的"
"列表"

#: superset/connectors/druid/views.py:249
msgid ""
"Redirects to this endpoint when clicking on the datasource from the "
"datasource list"
msgstr "在数据源列表中点击数据源将重定向到此端点"

#: superset/connectors/druid/views.py:255 superset/connectors/sqla/views.py:224
msgid "Associated Charts"
msgstr "关联的图表"

#: superset/connectors/druid/views.py:256
msgid "Data Source"
msgstr "数据源"

#: superset/connectors/druid/views.py:259 superset/connectors/sqla/views.py:236
msgid "Owner"
msgstr "所有者"

#: superset/connectors/druid/views.py:260
msgid "Is Hidden"
msgstr "隐藏"

#: superset/connectors/druid/views.py:261 superset/connectors/sqla/views.py:229
msgid "Enable Filter Select"
msgstr "启用过滤器选择"

#: superset/connectors/druid/views.py:262 superset/connectors/sqla/views.py:231
msgid "Default Endpoint"
msgstr "默认端点"

#: superset/connectors/druid/views.py:263
msgid "Time Offset"
msgstr "时间偏移"

#: superset/connectors/druid/views.py:264 superset/connectors/sqla/views.py:233
#: superset/views/core.py:279 superset/views/core.py:457
msgid "Cache Timeout"
msgstr "缓存时间"

#: superset/connectors/druid/views.py:296
msgid "Druid Datasources"
msgstr "Druid 数据源"

#: superset/connectors/druid/views.py:344
msgid "Scan New Datasources"
msgstr "扫描新的数据源"

#: superset/connectors/druid/views.py:352
msgid "Refresh Druid Metadata"
msgstr "刷新 Druid 元数据"

#: superset/connectors/sqla/models.py:527
msgid ""
"Datetime column not provided as part table configuration and is required by "
"this type of chart"
msgstr "缺少时间字段"

#: superset/connectors/sqla/models.py:531
msgid "Empty query?"
msgstr "查询为空？"

#: superset/connectors/sqla/models.py:539
msgid "Metric '{}' is not valid"
msgstr "'{}'是无效的"

#: superset/connectors/sqla/models.py:762
msgid ""
"Table [{}] doesn't seem to exist in the specified database, couldn't fetch "
"column information"
msgstr "指定的数据库中似乎不存在 [{}] 表，无法获取列信息"

#: superset/connectors/sqla/views.py:30
msgid "List Columns"
msgstr "列列表"

#: superset/connectors/sqla/views.py:31
msgid "Show Column"
msgstr "显示列"

#: superset/connectors/sqla/views.py:32
msgid "Add Column"
msgstr "添加列"

#: superset/connectors/sqla/views.py:33
msgid "Edit Column"
msgstr "编辑列"

#: superset/connectors/sqla/views.py:48
msgid ""
"Whether to make this column available as a [Time Granularity] option, column "
"has to be DATETIME or DATETIME-like"
msgstr "是否将此列作为[时间粒度]选项, 列中的数据类型必须是DATETIME"

#: superset/connectors/sqla/views.py:55
msgid ""
"The data type that was inferred by the database. It may be necessary to "
"input a type manually for expression-defined columns in some cases. In most "
"case users should not need to alter this."
msgstr ""
"由数据库推断的数据类型。在某些情况下，可能需要为表达式定义的列手工输入一个类"
"型。在大多数情况下，用户不需要修改这个数据类型。"

#: superset/connectors/sqla/views.py:89
msgid "Expression"
msgstr "表达式"

#: superset/connectors/sqla/views.py:90
msgid "Is temporal"
msgstr "表示时间"

#: superset/connectors/sqla/views.py:91
msgid "Datetime Format"
msgstr "时间格式"

#: superset/connectors/sqla/views.py:92
msgid "Database Expression"
msgstr "数据库表达式"

#: superset/connectors/sqla/views.py:103
msgid "List Metrics"
msgstr "指标列"

#: superset/connectors/sqla/views.py:104
msgid "Show Metric"
msgstr "显示指标"

#: superset/connectors/sqla/views.py:105
msgid "Add Metric"
msgstr "添加指标"

#: superset/connectors/sqla/views.py:106
msgid "Edit Metric"
msgstr "编辑指标"

#: superset/connectors/sqla/views.py:135
msgid "SQL Expression"
msgstr "SQL表达式"

#: superset/connectors/sqla/views.py:137
msgid "D3 Format"
msgstr "D3 格式"

#: superset/connectors/sqla/views.py:138
msgid "Is Restricted"
msgstr "受限的"

#: superset/connectors/sqla/views.py:157
msgid "List Tables"
msgstr "表列表"

#: superset/connectors/sqla/views.py:158
msgid "Show Table"
msgstr "显示表"

#: superset/connectors/sqla/views.py:159
msgid "Add Table"
msgstr "添加表"

#: superset/connectors/sqla/views.py:160
msgid "Edit Table"
msgstr "编辑表"

#: superset/connectors/sqla/views.py:191
msgid "Name of the table that exists in the source database"
msgstr "源数据库中存在的表的名称"

#: superset/connectors/sqla/views.py:193
msgid "Schema, as used only in some databases like Postgres, Redshift and DB2"
msgstr "模式，只在一些数据库中使用，比如Postgres、Redshift和DB2"

#: superset/connectors/sqla/views.py:199
msgid ""
"This fields acts a Superset view, meaning that Superset will run a query "
"against this string as a subquery."
msgstr ""
"这个字段执行Superset视图时，意味着Superset将以子查询的形式对字符串运行查询。"

#: superset/connectors/sqla/views.py:203
msgid ""
"Predicate applied when fetching distinct value to populate the filter "
"control component. Supports jinja template syntax. Applies only when `Enable "
"Filter Select` is on."
msgstr ""
"当获取不同的值来填充过滤器组件应用时。支持jinja的模板语法。只在`启用过滤器选"
"择`时应用。"

#: superset/connectors/sqla/views.py:209
msgid ""
"Redirects to this endpoint when clicking on the table from the table list"
msgstr "点击表列表中的表时将重定向到此端点"

#: superset/connectors/sqla/views.py:216
msgid "Whether the table was generated by the 'Visualize' flow in SQL Lab"
msgstr "表是否由 sql 实验室中的 \"可视化\" 流生成"

#: superset/connectors/sqla/views.py:219
msgid ""
"A set of parameters that become available in the query using Jinja "
"templating syntax"
msgstr "在查询中可用的一组参数使用JINJA模板语法"

#: superset/connectors/sqla/views.py:226
msgid "Changed By"
msgstr "修改人"

#: superset/connectors/sqla/views.py:228 superset/views/core.py:277
msgid "Last Changed"
msgstr "更新时间"

#: superset/connectors/sqla/views.py:232
msgid "Offset"
msgstr "偏移"

#: superset/connectors/sqla/views.py:235
msgid "Fetch Values Predicate"
msgstr "取值谓词"

#: superset/connectors/sqla/views.py:237
msgid "Main Datetime Column"
msgstr "主日期列"

#: superset/connectors/sqla/views.py:239
msgid "SQL Lab View"
msgstr "SQL Lab 视图"

#: superset/connectors/sqla/views.py:240
msgid "Template parameters"
msgstr "模板参数"

#: superset/connectors/sqla/views.py:257
msgid ""
"Table [{}] could not be found, please double check your database connection, "
"schema, and table name"
msgstr "找不到 [{}] 表，请仔细检查您的数据库连接、Schema 和 表名"

#: superset/connectors/sqla/views.py:291
msgid ""
"The table was created. "
"As part of this two-phase configuration "
"process, you should now click the edit button by "
"the new table to configure it."
msgstr ""
"表被创建。作为这两个阶段配置过程的一部分，您现在应该单击新表的编辑按钮来配置"
"它。"

#: superset/connectors/sqla/views.py:293
msgid "Refresh Metadata"
msgstr "刷新元数据"

#: superset/connectors/sqla/views.py:294
msgid "Refresh column metadata"
msgstr "刷新字段元数据"

#: superset/connectors/sqla/views.py:303
#, python-format
msgid "Metadata refreshed for the following table(s): %(tables)s"
msgstr "为下表刷新元数据:%(tables)s"

#: superset/connectors/sqla/views.py:311
msgid "Tables"
msgstr "数据表"

#: superset/templates/appbuilder/navbar_right.html:41
msgid "Profile"
msgstr "用户信息"

#: superset/templates/appbuilder/navbar_right.html:42
msgid "Logout"
msgstr "退出"

#: superset/templates/appbuilder/navbar_right.html:47
msgid "Login"
msgstr "登录"

#: superset/templates/appbuilder/general/widgets/base_list.html:37
msgid "Record Count"
msgstr "记录数"

#: superset/templates/appbuilder/general/widgets/base_list.html:46
msgid "No records found"
msgstr "没有找到任何记录"

#: superset/templates/superset/import_dashboards.html:11
msgid "Import dashboards"
msgstr "仪表盘导入"

#: superset/templates/superset/request_access.html:2
msgid "No Access!"
msgstr "不能访问!"

#: superset/templates/superset/request_access.html:7
#, python-format
msgid "You do not have permissions to access the datasource(s): %(name)s."
msgstr "您没有权限访问数据源(s): %(name)s。"

#: superset/templates/superset/request_access.html:13
msgid "Request Permissions"
msgstr "请求权限"

#: superset/templates/superset/models/database/macros.html:4
msgid "Test Connection"
msgstr "测试连接"

#: superset/views/annotations.py:49
msgid "Annotation Layers"
msgstr "注解层"

#: superset/views/annotations.py:52 superset/views/annotations.py:60
#: superset/views/core.py:306 superset/views/core.py:2739
#: superset/views/sql_lab.py:36
msgid "Manage"
msgstr "管理"

#: superset/views/annotations.py:57
msgid "Annotations"
msgstr "注解"

#: superset/views/base.py:79
#, python-format
msgid "Datasource %(name)s already exists"
msgstr "数据源%(name)s 已存在"

#: superset/views/base.py:123
msgid "json isn't valid"
msgstr "无效 JSON"

#: superset/views/base.py:127
msgid "Export to YAML"
msgstr "导出到YAML"

#: superset/views/base.py:127
msgid "Export to YAML?"
msgstr "导出到YAML？"

#: superset/views/base.py:188
msgid "Delete"
msgstr "删除"

#: superset/views/base.py:189
msgid "Delete all Really?"
msgstr "确定删除全部？"

#: superset/views/core.py:65
msgid "This endpoint requires the `all_datasource_access` permission"
msgstr "这个端点需要“all_datasource_access”的权限"

#: superset/views/core.py:67
msgid "The datasource seems to have been deleted"
msgstr "数据源已经被删除"

#: superset/views/core.py:68
msgid "The access requests seem to have been deleted"
msgstr "访问请求已被删除"

#: superset/views/core.py:70
msgid "The user seems to have been deleted"
msgstr "用户已经被删除"

#: superset/views/core.py:75
msgid ""
"You don't have access to this datasource. <a href='{}'>(Gain access)</a>"
msgstr "您无法访问此数据源。< a href = ‘{}’> (获取权限) </a>"

#: superset/views/core.py:78
msgid "You don't have access to this datasource"
msgstr "你不能访问这个数据源"

#: superset/views/core.py:98
#, python-format
msgid ""
"This view requires the database %(name)s or "
"`all_datasource_access` permission"
msgstr "此视图需要数据库 %(name)s或“all_datasource_access”权限"

#: superset/views/core.py:82
#, python-format
msgid "This endpoint requires the `all_datasource_access` permission"
msgstr "此端点需要“all_datasource_access”权限"

#: superset/views/core.py:189
msgid "List Databases"
msgstr "数据库列表"

#: superset/views/core.py:190
msgid "Show Database"
msgstr "显示数据库"

#: superset/views/core.py:191
msgid "Add Database"
msgstr "添加数据库"

#: superset/views/core.py:192
msgid "Edit Database"
msgstr "编辑数据库"

#: superset/views/core.py:233
msgid "Expose this DB in SQL Lab"
msgstr "在 SQL 工具箱中公开这个数据库"

#: superset/views/core.py:234
msgid ""
"Allow users to run synchronous queries, this is the default and should work "
"well for queries that can be executed within a web request scope (<~1 minute)"
msgstr ""
"允许用户运行同步查询，这是默认值，可以很好地处理在web请求范围内执行的查询"
"（<~ 1 分钟）"

#: superset/views/core.py:238
msgid ""
"Allow users to run queries, against an async backend. This assumes that you "
"have a Celery worker setup as well as a results backend."
msgstr ""
"允许用户对异步后端运行查询。 假设您有一个 Celery 工作者设置以及后端结果。"

#: superset/views/core.py:242
msgid "Allow CREATE TABLE AS option in SQL Lab"
msgstr "在 SQL 编辑器中允许 CREATE TABLE AS 选项"

#: superset/views/core.py:243
msgid ""
"Allow users to run non-SELECT statements (UPDATE, DELETE, CREATE, ...) in "
"SQL Lab"
msgstr ""
"允许用户在 SQL 编辑器中运行非 SELECT 语句（UPDATE，DELETE，CREATE，...）"

#: superset/views/core.py:247
msgid ""
"When allowing CREATE TABLE AS option in SQL Lab, this option forces the "
"table to be created in this schema"
msgstr ""
"当在 SQL 编辑器中允许 CREATE TABLE AS 选项时，此选项可以此模式中强制创建表"

#: superset/views/core.py:259
msgid ""
"If Presto, all the queries in SQL Lab are going to be executed as the "
"currently logged on user who must have permission to run them.<br/>If Hive "
"and hive.server2.enable.doAs is enabled, will run the queries as service "
"account, but impersonate the currently logged on user via hive.server2.proxy."
"user property."
msgstr ""
"如果使用Presto，SQL 工具箱中的所有查询都将被当前登录的用户执行，并且这些用户"
"必须拥有运行它们的权限。<br/>如果启用 Hive 和hive.server2.enable.doAs，将作为"
"服务帐户运行查询，但会根据hive.server2.proxy.user的属性伪装当前登录用户。"

#: superset/views/core.py:265
msgid ""
"Allow SQL Lab to fetch a list of all tables and all views across all "
"database schemas. For large data warehouse with thousands of tables, this "
"can be expensive and put strain on the system."
msgstr ""
"允许 sql lab 获取所有数据库架构中的所有表和所有视图的列表。对于具有数千个表的"
"大型数据仓库, 这可能会很耗费性能, 并给系统带来压力。"

#: superset/views/core.py:271
msgid "Expose in SQL Lab"
msgstr "在 SQL 工具箱中公开"

#: superset/views/core.py:272
msgid "Allow CREATE TABLE AS"
msgstr "允许 CREATE TABLE AS"

#: superset/views/core.py:273
msgid "Allow DML"
msgstr "允许 DML"

#: superset/views/core.py:274
msgid "CTAS Schema"
msgstr "CTAS 模式"

#: superset/views/core.py:276 superset/views/core.py:458
#: superset/views/core.py:575 superset/views/core.py:642
msgid "Creator"
msgstr "作者"

#: superset/views/core.py:278
msgid "SQLAlchemy URI"
msgstr "SQLAlchemy URI"

#: superset/views/core.py:280
msgid "Extra"
msgstr "扩展"

#: superset/views/core.py:281
msgid "Allow Run Sync"
msgstr "允许同步运行"

#: superset/views/core.py:282
msgid "Allow Run Async"
msgstr "允许异步运行"

#: superset/views/core.py:283
msgid "Impersonate the logged on user"
msgstr "模拟登录用户"

#: superset/views/core.py:302
msgid "Import Dashboards"
msgstr "导入仪表盘"

#: superset/views/core.py:334
msgid "CSV to Database configuration"
msgstr "csv 到数据库配置"

#: superset/views/core.py:375
msgid "CSV file \"%(csv_filename)s\" uploaded to table \"%(table_name)s\" in database \"%(db_name)s\""
msgstr "csv 文件 \"%(csv_filename)s\" 上传到数据库 \"%(db_name)s\" 中的表 \"%(table_name)s\""

#: superset/views/core.py:401 superset/views/core.py:667
#: superset/views/sql_lab.py:23 superset/views/sql_lab.py:60
msgid "User"
msgstr "用户"

#: superset/views/core.py:402
msgid "User Roles"
msgstr "用户角色"

#: superset/views/core.py:403
msgid "Database URL"
msgstr "数据库URL"

#: superset/views/core.py:405
msgid "Roles to grant"
msgstr "角色授权"

#: superset/views/core.py:406
msgid "Created On"
msgstr "创建日期"

#: superset/views/core.py:412
msgid "Access requests"
msgstr "访问请求"

#: superset/views/core.py:414 superset/views/core.py:679
msgid "Security"
msgstr "安全"

#: superset/views/core.py:421
msgid "List Charts"
msgstr "图表列表"

#: superset/views/core.py:422
msgid "Show Chart"
msgstr "显示图表"

#: superset/views/core.py:423
msgid "Add Chart"
msgstr "添加图表"

#: superset/views/core.py:424
msgid "Edit Chart"
msgstr "编辑图表"

#: superset/views/core.py:446
msgid ""
"These parameters are generated dynamically when clicking the save or "
"overwrite button in the explore view. This JSON object is exposed here for "
"reference and for power users who may want to alter specific parameters."
msgstr ""
"当单击“保存”或“覆盖”按钮时，这些参数会在视图中动态生成。高级用户可以在这里改"
"变特定的参数。"

#: superset/views/core.py:452
msgid "Duration (in seconds) of the caching timeout for this chart."
msgstr "图表数据过期时间（秒）"

#: superset/views/core.py:462
msgid "Last Modified"
msgstr "最后修改"

#: superset/views/core.py:463 superset/views/core.py:574
msgid "Owners"
msgstr "所有者"

#: superset/views/core.py:464
msgid "Parameters"
msgstr "参数"

#: superset/views/core.py:465 superset/views/core.py:512
msgid "Chart"
msgstr "图表"

#: superset/views/core.py:532
msgid "List Dashboards"
msgstr "仪表盘列表"

#: superset/views/core.py:533
msgid "Show Dashboard"
msgstr "显示仪表盘"

#: superset/views/core.py:534
msgid "Add Dashboard"
msgstr "添加仪表盘"

#: superset/views/core.py:535
msgid "Edit Dashboard"
msgstr "编辑仪表盘"

#: superset/views/core.py:547
msgid ""
"This json object describes the positioning of the widgets in the dashboard. "
"It is dynamically generated when adjusting the widgets size and positions by "
"using drag & drop in the dashboard view"
msgstr ""
"这个JSON对象描述了部件在看板中的位置。它是动态生成的，可以通过拖放，在看板中"
"调整整部件的大小和位置"

#: superset/views/core.py:627
msgid ""
"The CSS for individual dashboards can be altered here, or "
"in the dashboard view where changes are immediately "
"visible"
msgstr "可以在这里或者在看板视图修改单个看板的CSS样式"

#: superset/views/core.py:556
msgid "To get a readable URL for your dashboard"
msgstr "为看板生成一个可读的 URL"

#: superset/views/core.py:557
msgid ""
"This JSON object is generated dynamically when clicking the save or "
"overwrite button in the dashboard view. It is exposed here for reference and "
"for power users who may want to alter specific parameters."
msgstr ""
"当在看板视图中单击“保存”或“覆盖”按钮时，这些参数会在视图中动态生成。高级用户"
"可以在这里改变特定的参数。"

#: superset/views/core.py:562
msgid "Owners is a list of users who can alter the dashboard."
msgstr "“所有者”是一组可以修改看板的用户列表。"

#: superset/views/core.py:570 superset/views/core.py:640
msgid "Dashboard"
msgstr "看板"

#: superset/views/core.py:572
msgid "Slug"
msgstr "Slug"

#: superset/views/core.py:577
msgid "Position JSON"
msgstr "位置参数"

#: superset/views/core.py:579
msgid "JSON Metadata"
msgstr "JSON 模板"

#: superset/views/core.py:580
msgid "Underlying Tables"
msgstr "底层表"

#: superset/views/core.py:603
msgid "Export"
msgstr "导出"

#: superset/views/core.py:603
msgid "Export dashboards?"
msgstr "导出仪表盘?"

#: superset/views/core.py:668
msgid "Action"
msgstr "操作"

#: superset/views/core.py:669
msgid "dttm"
msgstr "dttm"

#: superset/views/core.py:677
msgid "Action Log"
msgstr "操作日志"

#: superset/views/core.py:874
msgid "Access was requested"
msgstr "请求访问"

#: superset/views/core.py:935
#, python-format
msgid ""
"%(user)s was granted the role %(role)s that gives access to the "
"%(datasource)s"
msgstr "授予 %(user)s %(role)s 角色来访问 %(datasource)s 数据库"

#: superset/views/core.py:951
#, python-format
msgid "Role %(r)s was extended to provide the access to the datasource %(ds)s"
msgstr "扩展角色 %(r)s 以提供对 datasource %(ds)s 的访问"

#: superset/views/core.py:960
msgid "You have no permission to approve this request"
msgstr "您没有权限批准此请求"

#: superset/views/core.py:1293 superset/views/core.py:1298
#: superset/views/core.py:1406 superset/views/core.py:1420
msgid "You don't have the rights to "
msgstr "你没有授权 "

#: superset/views/core.py:1293 superset/views/core.py:1406
msgid "alter this "
msgstr "修改这个 "

#: superset/views/core.py:1293 superset/views/core.py:1298
msgid "chart"
msgstr "图表"

#: superset/views/core.py:1298 superset/views/core.py:1420
msgid "create a "
msgstr "创建一个 "

#: superset/views/core.py:1407 superset/views/core.py:1420
msgid "dashboard"
msgstr "看板"

#: superset/views/core.py:1955
msgid ""
"Malformed request. slice_id or table_name and db_name arguments are expected"
msgstr "格式错误的请求。需要使用 slice_id 或 table_name 和 db_name 参数"

#: superset/views/core.py:1961
#, python-format
msgid "Chart %(id)s not found"
msgstr "图表 %(id)s 没有找到"

#: superset/views/core.py:1973
#, python-format
msgid "Table %(t)s wasn't found in the database %(d)s"
msgstr "在数据库 %(d)s 中找不到表 %(t)s"

#: superset/views/core.py:2127
#, python-format
msgid "Can't find User '%(name)s', please ask your admin to create one."
msgstr "用户’%(name)s’没有找到，请联系管理员创建。"

#: superset/views/core.py:2134
#, python-format
msgid "Can't find DruidCluster with cluster_name = '%(name)s'"
msgstr "不能找到具有 cluster_name = '%(name)s' 的 Druid 集群"

#: superset/views/core.py:2413
msgid "Query record was not created as expected."
msgstr "查询记录没有按预期创建。"

#: superset/views/core.py:2724
msgid "Template Name"
msgstr "模板名称"

#: superset/views/core.py:2736
msgid "CSS Templates"
msgstr "CSS 模板"

#: superset/views/core.py:2747
msgid "SQL Editor"
msgstr "SQL 编辑器"

#: superset/views/core.py:2752 superset/views/core.py:2762
msgid "SQL Lab"
msgstr "SQL 工具箱"

#: superset/views/core.py:2757
msgid "Query Search"
msgstr "查询搜索"

#: superset/views/core.py:2767
msgid "Upload a CSV"
msgstr "上传CSV文件"

#: superset/views/sql_lab.py:25
msgid "Status"
msgstr "状态"

#: superset/views/sql_lab.py:26
msgid "Start Time"
msgstr "开始时间"

#: superset/views/sql_lab.py:27 superset/views/sql_lab.py:64
msgid "End Time"
msgstr "结束时间"

#: superset/views/sql_lab.py:34
msgid "Queries"
msgstr "查询"

#: superset/views/sql_lab.py:43
msgid "List Saved Query"
msgstr "保存的查询列表"

#: superset/views/sql_lab.py:44
msgid "Show Saved Query"
msgstr "显示保存的查询"

#: superset/views/sql_lab.py:45
msgid "Add Saved Query"
msgstr "添加保存的查询"

#: superset/views/sql_lab.py:46
msgid "Edit Saved Query"
msgstr "编辑保存的查询"

#: superset/views/sql_lab.py:65
msgid "Pop Tab Link"
msgstr "流行标签链接"

#: superset/views/sql_lab.py:66
msgid "Changed on"
msgstr "改变为"

#: superset/views/sql_lab.py:86
msgid "Saved Queries"
msgstr "已保存查询"

#: superset/views/core.py:299
msgid "Chart Cache Timeout"
msgstr "表缓存超时"

#: superset/views/core.py:284
msgid ""
"Duration (in seconds) of the caching timeout for charts of this database. "
"A timeout of 0 indicates that the cache never expires. "
"Note this defaults to the global timeout if undefined."
msgstr ""
"此数据库图表的缓存超时持续时间(以秒为单位)。超时为0表示缓存永远不会过期。"
"注意，如果未定义，这默认为全局超时。"

#: superset/views/core.py:303
msgid "Allow Csv Upload"
msgstr "允许Csv上传"

#: superset/views/core.py:288
msgid "If selected, please set the schemas allowed for csv upload in Extra."
msgstr "如果选择，请额外设置csv上传允许的模式。"

#: superset/views/core.py:301
msgid "Asynchronous Query Execution"
msgstr "异步执行查询"

#: superset/views/core.py:237
msgid ""
"Operate the database in asynchronous mode, meaning  "
"that the queries are executed on remote workers as opposed "
"to on the web server itself. "
"This assumes that you have a Celery worker setup as well "
"as a results backend. Refer to the installation docs "
"for more information."
msgstr ""
"以异步模式操作数据库，这意味着查询是在远程工作人员上执行的，而不是在web服务器本身上执行的, "
"这假设您有一个Celery worker setup以及一个结果后端。有关更多信息，请参考安装文档。"

#: superset/connectors/sqla/views.py:173
msgid "Import a table definition"
msgstr "导入一个已定义的表"

#: superset/connectors/sqla/views.py:237
msgid ""
"Duration (in seconds) of the caching timeout for this table. "
"A timeout of 0 indicates that the cache never expires. "
"Note this defaults to the database timeout if undefined."
msgstr ""
"此表的缓存超时持续时间(以秒为单位)。超时为0表示缓存永远不会过期。"
"注意，如果未定义，这默认为数据库的超时。"

#: superset/views/core.py:520
msgid ""
"Duration (in seconds) of the caching timeout for this chart. "
"Note this defaults to the datasource/table timeout if undefined."
msgstr ""
"此图表的缓存超时持续时间(以秒为单位)。"
"注意，如果未定义，这默认为数据源/表超时。"

#: superset/connectors/druid/views.py:189
msgid ""
"Duration (in seconds) of the caching timeout for this cluster. "
"A timeout of 0 indicates that the cache never expires. "
"Note this defaults to the global timeout if undefined."
msgstr ""
"此集群的缓存超时持续时间(以秒为单位)。超时为0表示缓存永远不会过期。"
"注意，如果未定义，这默认为全局超时。"

#: superset/connectors/druid/views.py:276
msgid ""
"Duration (in seconds) of the caching timeout for this datasource. "
"A timeout of 0 indicates that the cache never expires. "
"Note this defaults to the cluster timeout if undefined."
msgstr ""
"此数据源的缓存超时持续时间(以秒为单位)。超时为0表示缓存永远不会过期。"
"注意，如果未定义，这默认为集群超时。"

#: superset\assets\src\explore\components\controls\AnnotationLayer.jsx:624
msgid "Layer Configuration"
msgstr "配置Layer"

#: superset\assets\src\explore\components\controls\AnnotationLayer.jsx:625
msgid "Configure the basics of your Annotation Layer."
msgstr "注释层基本配置"

#: superset\assets\src\explore\components\controls\AnnotationLayer.jsx:633
msgid "Mandatory"
msgstr "必填参数"

#: superset\assets\src\explore\components\controls\AnnotationLayer.jsx:637
msgid "Hide Layer"
msgstr "隐藏Layer"

#: superset\assets\src\explore\components\controls\AnnotationLayer.jsx:644
msgid "Annotation Layer Type"
msgstr "注释层类型"

#: superset\assets\src\explore\components\controls\AnnotationLayer.jsx:643
msgid "Choose the Annotation Layer Type"
msgstr "选择注释层类型"

#: superset\assets\src\explore\components\controls\AnnotationLayer.jsx:528
msgid "Display configuration"
msgstr "显示配置"

#: superset\assets\src\explore\components\controls\AnnotationLayer.jsx:533
msgid "Style"
msgstr "风格"

#: superset\assets\src\explore\components\controls\AnnotationLayer.jsx:529
msgid "Configure your how you overlay is displayed here."
msgstr "配置如何在这里显示您的覆盖。"

#: superset\assets\src\explore\components\controls\AnnotationLayer.jsx:577
msgid "Line Width"
msgstr "线宽"


#~ msgid "Please choose at least one \"Group by\" field"
#~ msgstr "请至少选择一个“分组”字段"

#~ msgid "'Group By' and 'Columns' can't overlap"
#~ msgstr "“分组”和“列”不能重叠"

#~ msgid "Must have one numeric column specified"
#~ msgstr "必须指定一个数字列"

#~ msgid "Could not connect to server"
#~ msgstr "无法连接服务器"

#~ msgid ""
#~ "%s is not right as a column name, please alias it (as in SELECT count(*))"
#~ msgstr "%s 不适合作为列名，请对其进行别名（如 SELECT count(*)）"

#~ msgid "Click the"
#~ msgstr "点击"

#~ msgid "button on the top right to save your changes."
#~ msgstr "请点击右上角的按钮，以保存您的更改。"

#~ msgid "Served from data cached %s, click to force refresh."
#~ msgstr "来自数据缓存 %s，点击强制刷新。"

#~ msgid "Click to force refresh"
#~ msgstr "点击强制刷新"

#~ msgid "Sorry, there was an error adding slices to this dashboard: %s"
#~ msgstr "对不起，在此仪表板中添加切片时出错：%s"

#~ msgid "Edit this dashboard's properties"
#~ msgstr "编辑这个仪表板的属性"

#~ msgid "Add Slices"
#~ msgstr "添加切片"

#~ msgid "Add a new slice to the dashboard"
#~ msgstr "向仪表板添加新的切片"

#~ msgid "Add Slices to Dashboard"
#~ msgstr "将切片添加到仪表板"

#~ msgid "Edit slice properties"
#~ msgstr "编辑切片属性"

#~ msgid "Please enter a slice name"
#~ msgstr "请输入切片名称"

#~ msgid "Save A Slice"
#~ msgstr "保存一个切片"

#~ msgid "Overwrite slice %s"
#~ msgstr "覆盖切片 %s"

#~ msgid "[slice name]"
#~ msgstr "[切片名称]"

#~ msgid "Add slice to existing dashboard"
#~ msgstr "将切片添加到现有仪表板"

#~ msgid "Check out this slice: %s"
#~ msgstr "查看切片：%s"

#~ msgid "Select %s"
#~ msgstr "选择 %s"

#~ msgid ""
#~ "Perhaps your data has grown, your database is under unusual load, or you "
#~ "are simply querying a data source that is to large to be processed within "
#~ "the timeout range. If that is the case, we recommend that you summarize "
#~ "your data further."
#~ msgstr ""
#~ "也许你的数据增长了，你的数据库处于非正常的负载下，或者你只是查询一个大的数"
#~ "据源在超时范围内处理。如果是这种情况，我们建议您进一步探查您的数据特征。"

#~ msgid "Annotation layers to overlay on the visualization"
#~ msgstr "注释图层重叠在可视化上"

#~ msgid "Select a annotation layer"
#~ msgstr "选择一个注释图层"

#~ msgid "Error while fetching annotation layers"
#~ msgstr "获取注释图层时出错"

#~ msgid "Choose the metric"
#~ msgstr "选择一个指标"

#~ msgid "X Scale Interval"
#~ msgstr "X 比例间隔"

#~ msgid "Y Scale Interval"
#~ msgstr "Y 比例间隔"

#~ msgid ""
#~ "Whether to show extra controls or not. Extra controls include things like "
#~ "making multiBar charts stacked or side by side."
#~ msgstr "是否显示额外的控制。额外的控制包括，制作堆叠或并排的多条形图。"

#~ msgid ""
#~ "The time column for the visualization. Note that you can define arbitrary "
#~ "expression that return a DATETIME column in the table or. Also note that "
#~ "the filter below is applied against this column or expression"
#~ msgstr ""
#~ "可视化的时间列。请注意，您可以定义在表中返回 DATETIME 列的任意表达式。另请"
#~ "注意，下面的过滤器应用于此列或表达式"

#~ msgid "Limits the number of time series that get displayed"
#~ msgstr "限制显示的时间序列的数量"

#~ msgid "Range Filter"
#~ msgstr "范围过滤"

#~ msgid ""
#~ "The server could not be reached. You may want to verify your connection "
#~ "and try again."
#~ msgstr "服务器不可达。您可能需要验证连接并重试。"

#~ msgid "An unknown error occurred. (Status: %s )"
#~ msgstr "出现未知错误。（状态：%s）"

#~ msgid "No slices"
#~ msgstr "没有切片"

#~ msgid "Slices"
#~ msgstr "切片"

#~ msgid "No favorite slices yet, go click on stars!"
#~ msgstr "暂无收藏的切片，去点击星星吧！"

#~ msgid ""
#~ "Whether the access to this metric is restricted to certain roles. Only "
#~ "roles with the permission 'metric access on XXX (the name of this "
#~ "metric)' are allowed to access this metric."
#~ msgstr "是否访问受限。只有有权限的用户才能访问。"

#~ msgid ""
#~ "The list of slices associated with this table. By altering this "
#~ "datasource, you may change how these associated slices behave. Also note "
#~ "that slices need to point to a datasource, so this form will fail at "
#~ "saving if removing slices from a datasource. If you want to change the "
#~ "datasource for a slice, overwrite the slice from the 'explore view'"
#~ msgstr ""
#~ "与此表关联的切片列表。通过更改此数据源，您可以更改相关的切片。还要注意，切"
#~ "片需要指向数据源，因此如果从数据源中删除切片，则此形式将无法保存。如果要更"
#~ "改切片的数据源，请从`浏览视图`覆盖切片，"

#~ msgid "Associated Slices"
#~ msgstr "相关切片"

#~ msgid "Import"
#~ msgstr "导入"

#~ msgid "Welcome!"
#~ msgstr "欢迎！"

#~ msgid ""
#~ "All the queries in Sql Lab are going to be executed on behalf of "
#~ "currently authorized user."
#~ msgstr "SQL Lab 中所有的查询都将被当前授权用户执行。"

#~ msgid "Impersonate queries to the database"
#~ msgstr "模拟对数据库的查询"

#~ msgid "List Slices"
#~ msgstr "切片列表"

#~ msgid "Show Slice"
#~ msgstr "显示切片"

#~ msgid "Add Slice"
#~ msgstr "添加切片"

#~ msgid "Edit Slice"
#~ msgstr "编辑切片"

#~ msgid "Duration (in seconds) of the caching timeout for this slice."
#~ msgstr "切片数据过期时间（秒）"

#~ msgid "Slice"
#~ msgstr "切片"

#~ msgid ""
#~ "This json object describes the positioning of the widgets in the "
#~ "dashboard. It is dynamically generated when adjusting the widgets size "
#~ "and positions by using drag & drop in the dashboard view."
#~ msgstr ""
#~ "这个 JSON 对象描述了部件在看板中的位置。它是动态生成的，可以通过拖放，在看"
#~ "板中调整整部件的大小和位置。"

#~ msgid "Slice %(id)s not found"
#~ msgstr "切片 %(id)s 没有找到"

#~ msgid "Cannot find User %(name)s, please ask your admin to create one."
#~ msgstr "找不到用户 %(name)s，请您让管理员创建一个。"
